Customer Support; Set-Up - American Audio DCD-PRO610 Operating Instructions Manual

Professional dual cd player
Hide thumbs Also See for DCD-PRO610:
Table of Contents

Advertisement

CUSTOMER SUPPORT

Customer Support:
to answer any question should you encounter problems during your set up or initial operation. You may also visit
us on the web at www.americanaudio.us for any comments or suggestions. For service related issue please
contact American Audio
Time.
Voice:
Fax:
E-mail:
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will
void your manufactures warranty. In the unlikely event your unit may require service please contact customer
support. Please do not return to your dealer without first contacting customer support.

SET-UP

1. Checking the Contents:
Be sure your DCD-PRO610™ was shipped with the following:
1)
DCD-PRO610™ Dual CD player unit.
2)
Dual Male to Male RCA cable.
1)
Warranty card.
2. Installing the Units
1)
Place your unit on a flat surface or mount it in a secure rack mount case.
2)
Be sure the player is mounted in a well ventilated area where it will not be exposed to direct sunlight,
high temperatures, or high humidity.
3)
Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable
interference.
3. Connections
1)
Be sure main power is connected last to prevent any electrical damage.
2)
AUDIO CONNECTIONS: Use the included RCA cable to connect the DCD-PRO610™ outputs to the
line inputs of a mixer. Never connect a CD player's output to a mixers "phono" inputs.
3)
CONTROL JACK CONNECTIONS: Use the supplied 1/8" mono mini plug cable to connect your DCD-
PRO610™ to a mini jack connection (A or B) on a compatible American Audio
"Fader Q Start" mixer. (This will enable the Fader "Q" Start function - See "Q" start control page 7)
CAUTION: Be sure to use the supplied control cables. Using a different type of cable may result in unit damage.
To avoid server unit damage, be sure main power is off when connecting the control cables.
CAUTION:
• The player will work normally when the main unit is
mounted with the front panel within 15 degrees of
the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
(Figure 1)
©
American Audio
provides a toll free customer support line, to provide set up help and
®
. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard
®
(800) 322-6337
(323) 582-2941
support@americanaudio.us
Figure 1
American Audio
- www.americanaudio.us - DCD-PRO610™ Instruction Manual Page 6
®
1) DCD-PRO610™ Controller Head Unit
2) Q-Start 1/8" Male to Male Mini Plug
1) Operating instructions (this booklet).
CAUTION:
• The LCD is designed to be clearly visible within the
angles shown in Figure 2. Mount the control unit
so that the visual angle is within this range.
Figure 2
or American DJ
®
®

Advertisement

Table of Contents
loading

Table of Contents