Banner RP-LS42F-75LE Instruction Manual

Rope Pull Emergency Stop Switches
Instruction Manual
RP-LS42F-xxLE Series 42 mm Latching Switches with Rope/Cable Actuators
Models
75 m (246.1 ft) / 300 N
RP-LS42F-75LE
Run
13 14
21 22
33 34
41 42
Note: This symbol
contact (IEC 60947-5-1) is used in the switching diagram
to identify the point in actuator travel where the normally-
closed safety contact is fully open.
Important... Read this before proceeding!
The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this
product and its application. Banner Engineering Corp. has made every effort to provide complete application, installation, operation,
and maintenance instructions. Please contact a Banner Applications Engineer with any questions regarding this product.
The user is responsible for making sure that all machine operators, maintenance personnel, electricians, and supervisors are
thoroughly familiar with and understand all instructions regarding the installation, maintenance, and use of this product, and with the
machinery it controls. The user and any personnel involved with the installation and use of this product must be thoroughly familiar
Original Document
181295 Rev. B
• Positive-opening safety contacts (IEC 60947-5-1), not dependent upon springs
• Both safety contacts latch open when rope is pulled, broken, or if tension is reduced; requires
manual reset (IEC 60947-5-5)
• Compliant with ANSI B11.19, NFPA 79, IEC/EN 60204-1 and ISO 13850 Emergency Stop
requirements
• Heavy-duty thermoplastic housing (polyamide), rated IP67, suitable for demanding industrial
environments; insulated device
• Innovative quick-connect design provides quick, easy rope fixing and tensioning on RP-
LS42F-..LE models
• RP-LS42F-..LE models have an integrated emergency stop button
• Rope spans of 25 m (82 ft), 37.5 m (125 ft), and 75 m (245 ft), depending on model
• Monitoring contacts operate opposite the safety contacts, for monitoring by another device or
interfaced with EZ-LIGHT
• Tension indicator window indicates proper rope tension for operation or safety contacts
latched open (the rope pull or the E-stop button is actuated)
Maximum Rope Length / Force
38 m (124.7 ft) / 175 N
RP-LS42F-38LE
Figure 1. Contact State
Pull / Break
13
21
33
41
for a positive-opening safety
4 November 2021
®
indicators
25 m (82.0 ft) / 100 N
RP-LS42F-25LE
+4.3 mm
+3.5 mm
14
22
34
42 -3.5 mm
-4.3 mm
Contacts:
Rope E-Stop
Connection Button
Turnbuckle Yes
Figure 2. Switching Diagram
+5 mm
100N / 175N / 300N
Latch
0 mm 80N / 140N / 240N
Latch
-5 mm 60N / 105N / 180N
Operating point ± 0.5 mm
Actuating force ± 15%
Open Closed Transition
181295