Table of Contents
Advertisement
SRS10 (SRS11 / SRS13 / SRS14) Series
Thank you for purchasing a Shimaden Digital Controller. After making sure the product fits the desired description,
you should carefully read the instructions and get a good understanding of the contents before attempting to operate
the equipment.
Request
The instruction manual should be kept in a handy place where the end user can refer to it when necessary.
Preface
The instruction manual was written for those who perform wiring, installation and routine maintenance for the
SRS10 (SRS11/SRS13/SRS14) Series. The instruction manual contains a description of the operating method,
functions, wiring, mounting method and precautions when handling the SRS10 (SRS11/SRS13/SRS14) Series
(hereinafter referred to as the SRS10 Series unless a separate description is required). You should therefore keep it
in a handy place to refer to when operating and handling the equipment. Be sure to observe all precautions and
adhere to the procedures provided in the manual. The intsruction manual assumes that fixed value control is applied.
For information on programming function and communication (optional items), see the instruction manual for the
individual function.
Digital Controller
Instruction Manual
SRS10F-1BE
Sep. 2008
Advertisement
Table of Contents
Related Manuals for Shimaden SRS11 Series
Summarization of Contents
Safety Rules
General Safety Precautions
Covers WARNING and CAUTION statements for safe operation and preventing damage.
Introduction
Preliminary Checks and Notes
Guidance on checking product, accessories, and usage notes before operation.
Installation and Wiring
Installation Site and Environmental Conditions
Details environmental conditions required for proper controller installation.
Mounting, Dimensions, and Panel Cutout
Covers physical installation steps, dimensions, and panel cutout specifications.
Wiring and Terminal Connections
Provides detailed instructions for electrical wiring and terminal identification.
Terminal Arrangement and Operation Prep
Explains terminal layouts and essential preparatory steps before operating the controller.
Names and Functions of Front Panel Parts
Front Panel Display and Indicators
Details the measured value, target set value, and action status displays.
Operating Key Functions
Explains the purpose and operation of each key on the controller's front panel.
Parameter Diagram and Setting
Parameter Diagram and Screen Navigation Overview
Visual overview of parameter structure and methods for switching between different setting screens.
Power-On Display and Screen Switching
Describes the initial screen display upon power-up and how to navigate between screens and screen groups.
Auto Return and Screen Group Settings
Explains auto return functionality and configurations within screen groups.
Screen Explanation and Setting Items
Key Screen Overviews (Basic, Standby, Output, Event)
Explanations of essential screens like basic display, standby, output monitoring, and event configuration.
Initial Setting and Configuration Screens
Details on the initial setup screens and manufacturer-configured settings for the controller.
Measuring Range Codes
Input Type and Measuring Range Selection
Table mapping input types to specific measuring range codes for accurate sensor input.
Explanation of Functions
Events and Alarm Actions
Describes various event types, alarm actions, and standby/non-standby behavior.
Heater Break/Loop Alarms
Explains the functionality and setup of heater break and loop alarms.
PID Control Parameters (P, I, D)
Details the proportional, integral, and derivative parameters for PID control.
Control Output Settings
Covers control output characteristics, limiters, and proportional cycling time.
External Control Input (DI) Functions
Explains how external digital inputs can be used to control controller actions.
Soft Start Function
Explains the soft start feature for gradually increasing control output to prevent inrush current.
Causes and Remedy of Trouble and Errors
Troubleshooting Common Problems and Causes
Identifies common operational issues, their causes, and potential solutions.
Error Code Diagnosis and Resolution
Guides on interpreting error messages and resolving specific fault conditions.
Parameter Setting Record
Recording Controller Settings
A table provided for users to record their configured parameter settings for future reference.
Specifications
Display, Input, and Output Specifications
Technical details on display capabilities, input types, control output, and event output.
Communication, General, and Safety Specifications
Information on communication protocols, general operating conditions, safety standards, and physical characteristics.
Need help?
Do you have a question about the SRS11 Series and is the answer not in the manual?
Questions and answers