Table of Contents
Advertisement
(SRS11A / SRS12A / SRS13A / SRS14A)
Instruction Manual (Detailed Version)
Thank you for purchasing a Shimaden Digital Controller. After making sure the product fits the desired description,
you should carefully read the instructions and get a good understanding of the contents before attempting to operate
the equipment.
Request
The instruction manual should be kept in a handy place where the end user can refer to it when necessary.
Preface
This instruction manual (detailed version) was written for those who perform wiring, installation, and routine
maintenance for the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series.
This manual contains a description of the operating method, functions, wiring, mounting method, and precautions
when handling the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series (hereinafter referred to as the SRS10A
Series unless a separate description is required). You should, therefore, keep it handy to refer to it when operating
and handling the equipment.
Be sure to observe all precautions and adhere to the procedures provided herein.
SRS10A Series
Digital Controller
SRS10AF-1ME
Apr. 2021
Advertisement
Table of Contents
Related Manuals for Shimaden SRS13A
Summarization of Contents
Introduction and Preliminary Checks
Preliminary Check and Notes on Use
Verifying product model, accessories, and general operation guidelines.
Installation and Wiring
Installation Site and Mounting
Environmental requirements and physical installation procedures.
Wiring and Terminal Layout
Connecting the controller's electrical interfaces and terminal diagrams.
Operation Preparations
Steps for initial setup and configuration before operation.
Front Panel Interface
Display Indicators
PV, SV, and status indicators on the front panel.
Operating Keys
Buttons for user interaction, navigation, and control.
Parameter Diagram and Screen Navigation
Parameter Diagram Overview
Visual guide to the controller's screen structure and flow.
Screen Navigation and Auto Return
Navigating screens and automatic return to the basic screen.
Screen Group 0 Configuration
Basic Settings (SV, Manual Output)
Setting target values and adjusting control output manually.
Advanced Functions (AT, Standby, Events, Multi-SV)
Auto tuning, standby modes, events, and multiple set values.
Screen Explanations
Basic, Standby, and Monitoring Screens
Default, standby, and various monitoring display screens.
Output Monitoring and Control
Displaying and controlling output 1 and 2.
PID Control Configuration
PID Overview and Output 1 Settings
PID structure and configuration for output 1.
PID Output 2 Settings
Configuration of PID parameters for output 2.
Event Configuration
Event Types, Hysteresis, and Standby
Defining event triggers, hysteresis, and standby behavior.
Event Output Characteristics
Configuring event signal output types and actions.
Heater Alarms and Analog Output
Heater Alarm Settings
Monitoring and configuring heater status alarms.
Analog Output Configuration
Configuring scaling and limiting for analog signals.
External Control Input (DI)
DI Mode Settings
Configuring digital inputs for various control functions.
Communication Settings
Communication Modes and Data Formats
Setting up communication parameters and data structures.
Master Mode and Address Settings
Configuring communication with other devices.
Control Output and Input Settings
Output Control Features
Soft start, limiters, cycling time, and characteristics.
Input Scaling and Display Settings
Configuring input signal range, units, and display.
Measuring Range Codes
Thermocouple and Universal Input Ranges
Codes for various thermocouple, RTD, mV, and Voltage inputs.
Explanation of Functions
Events, Alarms, and PID Basics
Detailed explanation of alarms, events, and PID control principles.
Heater Alarms and Output Functions
Functionality of heater alarms and control output behaviors.
Control Output Functions
Output Limiters and Cycling Time
Setting output limits and adjusting proportional cycling time.
Two-Position Action
Using hysteresis to prevent rapid switching in two-position control.
External Control Input (DI) Functions
DI Action Modes (EXE, MAN, AT, ESV2)
Configuring DI for execution, manual output, AT, and SV selection.
Soft Start Function
Soft Start Trigger and Cancellation Conditions
Conditions that initiate and cancel the soft start feature.
Causes and Remedy of Trouble and Errors
General Troubleshooting
Steps for diagnosing and resolving general operational problems.
Specific Error Diagnoses
Troubleshooting abnormal inputs and heater alarms.
Parameter Mask/Lock Function
Mask/Lock Overview and Diagram
Purpose, limitations, and visual guide to parameter masking.
Mask/Lock Setting Contents
How to apply, initialize, and manage mask/lock settings.
Parameter Setting Record
Initial and User Settings
Recording default and user-configured parameter values.
Specifications
Display, Input, and Control Specifications
Details on the display, input types, and control functions.
Event, Programming, and Output Specifications
Specifications for event outputs, programming, and control outputs.
Device Interfaces and General Information
Analog, DI, CT, and Communication Interfaces
Specifications for optional analog, digital, CT, and communication interfaces.
General Device and Environmental Specifications
Overall device construction, power, and environmental requirements.
Need help?
Do you have a question about the SRS13A and is the answer not in the manual?
Questions and answers