Table of Contents
Advertisement
(SRS11A / SRS12A / SRS13A / SRS14A)
Instruction Manual (Detailed Version)
Thank you for purchasing a Shimaden Digital Controller. After making sure the product fits the desired description,
you should carefully read the instructions and get a good understanding of the contents before attempting to operate
the equipment.
Request
The instruction manual should be kept in a handy place where the end user can refer to it when necessary.
Preface
This instruction manual (detailed version) was written for those who perform wiring, installation, and routine
maintenance for the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series.
This manual contains a description of the operating method, functions, wiring, mounting method, and precautions
when handling the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series (hereinafter referred to as the SRS10A
Series unless a separate description is required). You should, therefore, keep it handy to refer to it when operating
and handling the equipment.
Be sure to observe all precautions and adhere to the procedures provided herein.
SRS10A Series
Digital Controller
SRS10AF-1ME
Apr. 2021
Advertisement
Table of Contents
Related Manuals for Shimaden SRS14A
Summarization of Contents
Safety Rules and Precautions
Warning Information
Critical safety information regarding injury or death if instructions are not followed.
Caution Information
Important notes for preventing equipment damage if instructions are not followed.
Introduction and Preliminary Checks
Preliminary Check
Ensures all components are present and undamaged before operation.
Notes on Use
Guidelines for proper handling and cleaning of the controller.
Installation and Wiring Procedures
Installation Site Requirements
Specifies environmental requirements for safe and proper controller operation.
Mounting Instructions
Instructions for securely installing the controller into a panel.
External Dimensions and Panel Cutout
Provides physical dimensions and panel cutout specifications for installation.
Wiring Guidelines
Detailed guidance on connecting the controller's terminals and wiring precautions.
Terminal Layout
Diagrams showing terminal connections for different controller models.
Terminal Arrangement Table
A table mapping terminal numbers to their respective functions and descriptions.
Operation Preparations
Steps to perform before operating the controller, including wiring checks and initial settings.
Front Panel Overview
Measured Value (PV) Display
Displays the current measured value (PV).
Target Set Value (SV) Display
Displays the current target set value (SV).
Action Display Indicators
LED indicators showing controller status like RUN, AT, MAN, OUT, EV, COM.
Operating Keys Description
Description of keys for navigation, setting adjustment, and control execution.
Parameter Diagram and Setting Procedures
Parameter Diagram Overview
Visual overview of screen groups and parameter navigation flow.
Display Behavior on Power Application
Describes the initial screens displayed upon power-up.
Screen Switching Methods
Explains how to navigate between different screens and screen groups.
Auto Return Functionality
Details the automatic return to the basic screen after a period of inactivity.
Screen Group 0 Settings
Guides on setting target set values (SV) and manual control output.
Screen Explanations and Settings
Basic Screen (0-0)
The primary screen displaying PV and SV, allowing navigation to other settings.
Standby Action Setting Screen (0-1)
Screen for setting the controller's standby or execution mode.
Output 1 Monitoring Screen (0-2)
Monitors and allows manual adjustment of control output 1.
Output 2 Monitoring Screen (0-3)
Monitors and allows manual adjustment of control output 2.
FIX Event 1 Setting Screen (0-12)
Sets the value for event 1, used in fixed value control mode.
Measuring Range Codes
Measuring Range Codes Table
Lists all available measuring range codes for various input types and units.
Explanation of Functions
Events Explained
Explains event types, alarms, and standby actions for controller operations.
Heater Break/Loop Alarm
Details on heater break/loop alarm detection using current transformers (CT).
PID Control Functions
Explains Proportional (P), Integral (I), and Derivative (D) control actions for PID settings.
Control Output Functions
Output Limiters Setting
Sets output limiters to control minimum and maximum output values.
Proportional Cycling Time
Defines the time period for ON/OFF switching in proportional control.
Control Output Characteristics
Configures heating (RA) or cooling (DA) characteristics for control outputs.
Two-Position Action with Hysteresis
Explains using hysteresis to prevent frequent switching in two-position control.
External Control Input (DI) Functions
Controller Action Execution (EXE1/EXE2)
Toggles controller action between execution and stop via external input.
Manual Output Control (MAN)
Switches to manual output control via external input.
Auto Tuning Execution (AT)
Enables auto tuning execution from an external source.
SV External Selection (ESV2)
Allows switching of target set values (SV) using external DI inputs.
Output Characteristic Switching (ACT1/ACT2)
Switches control output characteristics between RA (heating) and DA (cooling).
Program Mode Switching (PROG)
Switches between fixed value control (FIX) and program control (PROG) modes.
Start Pattern Selection (PTN2/PTN3)
Selects program start patterns using DI inputs.
Total Unlatching (L_RS)
Unlatches all event outputs via external input.
Soft Start and Decimal Point Adjustment
Soft Start Function
Details conditions for triggering and canceling the soft start function.
Decimal Point Position Change
Sets display position for decimal point for various input types.
Troubleshooting and Error Resolution
Trouble Causes and Remedies
Troubleshooting common problems and their solutions.
Error Causes and Remedies
Diagnosing and resolving specific error messages and abnormal inputs.
Parameter Mask/Lock Functionality
Mask/Lock Overview
Explains setting masks or key locks for parameters.
Parameter Diagram for Mask/Lock
Visual overview of the parameter mask/lock diagram.
Mask/Lock Setting Contents
Details on how to set masks/locks for parameters and screen groups.
Parameter Setting Record
Parameter Setting Record Table
A template for recording controller settings for convenience and backup.
Controller Specifications
Display Specifications
Details on the digital display, accuracy, resolution, and update cycle.
Input Specifications
Covers input types, resistance, scaling, and isolation for various signals.
Control Specifications
Details on control modes, PID settings, output characteristics, and alarms.
Event Output Specifications
Information on event types, actions, hysteresis, and standby for optional event outputs.
Communication Function Specifications
Details on communication protocols, speed, data formats, and modes.
General Specifications
Covers environmental conditions, power supply, construction, and weight.
Need help?
Do you have a question about the SRS14A and is the answer not in the manual?
Questions and answers