Table of Contents
Advertisement
(SRS11A / SRS12A / SRS13A / SRS14A)
Instruction Manual (Detailed Version)
Thank you for purchasing a Shimaden Digital Controller. After making sure the product fits the desired description,
you should carefully read the instructions and get a good understanding of the contents before attempting to operate
the equipment.
Request
The instruction manual should be kept in a handy place where the end user can refer to it when necessary.
Preface
This instruction manual (detailed version) was written for those who perform wiring, installation, and routine
maintenance for the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series.
This manual contains a description of the operating method, functions, wiring, mounting method, and precautions
when handling the SRS10A (SRS11A/SRS12A/SRS13A/SRS14A) Series (hereinafter referred to as the SRS10A
Series unless a separate description is required). You should, therefore, keep it handy to refer to it when operating
and handling the equipment.
Be sure to observe all precautions and adhere to the procedures provided herein.
SRS10A Series
Digital Controller
SRS10AF-1ME
Apr. 2021
Advertisement
Table of Contents
Related Manuals for Shimaden SRS11A
Summarization of Contents
Safety Rules
WARNING Statements
Critical safety instructions that could result in injury or death if not followed.
CAUTION Statements
Important warnings about potential equipment damage if instructions are not followed.
Introduction
Preliminary Check and Notes on Use
Check equipment, accessories, and follow basic usage guidelines.
Installation and Wiring
Installation Site Requirements
Specifies environmental conditions required for proper controller operation.
Mounting and Panel Cutout
Details mounting procedures and panel cutout specifications.
Wiring and Terminal Layout
Explains wiring precautions and illustrates terminal connections.
Operation Preparations
Outlines the steps for preparing the controller for operation after installation.
Front Panel Components
Displays and Indicators
Describes the PV/SV displays and action indicator LEDs.
Operating Keys
Details the functions of the front panel keys for navigation and operation.
Parameter Diagram and Setting
Parameter Diagram Overview
Visual overview of parameter screens and interconnections.
Screen Navigation and Switching
How to navigate between screens and screen groups.
Setting Target Set Values (SV)
Step-by-step guide to setting target set values.
Manual Control Output Setting
How to manually set control output values.
Auto Tuning (AT) Function
Details auto-tuning execution, cancellation, and conditions.
Event Setting Procedures
How to set event types and values for alarms.
Multi SV and External Selection
Setting and switching multiple target set values.
Screen Explanation and Setting Items
Basic and Monitoring Screens
Explanation of basic and output monitoring screens.
PID Setting Screens
Details on screens for setting PID parameters (P, I, D, etc.).
Event Setting Screens
Explains screens for setting event types, hysteresis, and standby actions.
Heater Alarm and Analog Output Settings
Configuration of heater alarms and analog output signals.
External Control Input (DI) Settings
Configuration of external control input modes for DI1-DI4.
Communication Settings
Configuration of communication parameters like mode, speed, and address.
Explanation of Functions
Event Actions and Standby Selection
Explains event actions, deviation/absolute alarms, and standby selection.
PID Control Parameters
Detailed explanation of PID parameters (P, I, D, Manual Reset, SF).
Control Output Functions
Explanation of output limiters, cycling time, characteristics, and two-position action.
External Control Input (DI) Functions
Explains functions controlled by DI inputs (EXE, MAN, AT, ESV2).
Soft Start Functionality
Explains the soft start function and its triggering/canceling conditions.
Causes and Remedy of Trouble and Errors
Troubleshooting Common Problems
Lists common issues, causes, and remedies for instrument operation.
Abnormal Input and Alarm Error Troubleshooting
Guides for diagnosing abnormal measured input and alarm errors.
Parameter Mask/Lock Function
Overview of Mask/Lock
Introduction to parameter masking and key locking features.
Mask/Lock Setting Contents
Details on setting parameters to display, mask, or lock for various items.
Specifications
Display Specifications
Details on the controller's display capabilities and accuracy.
Input Specifications
Technical specifications for various input types and scaling.
Control Specifications
Technical specifications for control modes, outputs, PID, and events.
Communication and External Input Specifications
Technical specs for communication interfaces and external control inputs.
General Specifications
Environmental, power, construction, and safety specifications.
Need help?
Do you have a question about the SRS11A and is the answer not in the manual?
Questions and answers