Related Manuals for MacDon M200 2009
Summarization of Contents
SET-UP INSTRUCTIONS
Tractor Frame Preparation
Drilling holes in tractor frame for attachment mounting based on model year.
Draper Drive Block Installation
Installing the DWA drive block and connecting hydraulic hoses to the tractor.
Platform Rail Installation
Removing and installing platform steps and rail weldments for attachment mounting.
Linkage Installation
Mounting the support structure to the tractor frame for M150 and M200 models.
Deck Installation
Removing shipping stands and positioning the deck for assembly to the linkage.
Hydraulic Connections
Connecting hydraulic hoses and fittings for various header configurations.
Electrical Installation
Installing rocker and rotary switches in the tractor cab for control.
Tractor Monitor Setup
Configuring the tractor monitor to recognize and control the DWA.
OPERATION
Safety Precautions
Essential safety warnings for operating the attachment, including shields and safety pins.
Deck Lift and Control
Procedures for raising/lowering the deck using tractor controls or installed switches.
Deck Angle and Height Adjustment
Adjusting deck angle and height for optimal crop projection and ground clearance.
Draper Tracking and Shield Position
Checking draper tracking and adjusting forming shield position for optimal crop flow.
Conditioner Roll Settings
Setting conditioner roll gap for proper crop throwing and avoiding component stress.
Operating Recommendations
Guidance on header settings, ground speed, and disc speed for optimal performance.
MAINTENANCE/SERVICE
Draper Tension and Tracking Adjustment
Adjusting draper tension and tracking for proper operation and longevity.
Draper Replacement and Adjustment
Procedure for replacing the draper and adjusting front skid and rear deflector.
Draper Roller Maintenance
Procedures for maintaining drive and idler rollers, including lubrication.
Draper Roller Bearing/Seal Replacement
Replacing bearings and seals in draper rollers, including cleaning and proper assembly.
REPAIR PARTS
Serial Number
Location and importance of recording the serial number for parts and service.
DECK, DRAPER & ROLLERS (Illustration 1)
DECK, DRAPER & ROLLERS (Illustration 1) - Part List
Detailed list of parts for the deck, draper, and rollers from illustration 1.
DECK, DRAPER & ROLLERS (Illustration 2)
DECK, DRAPER & ROLLERS (Illustration 2) - Part List
Detailed list of parts for deck, draper, and rollers from illustration 2.
DECK SUPPORTS & LINKAGE (Illustration 1)
DECK SUPPORTS & LINKAGE (Illustration 1) - Part List
Detailed list of parts for deck supports and linkage from illustration 1.
DECK SUPPORTS & LINKAGE (Illustration 2)
DECK SUPPORTS & LINKAGE (Illustration 2) - Part List
Detailed list of parts for deck supports and linkage from illustration 2.
HYDRAULICS & IN-CAB ELECTRICAL
Hydraulic Components Overview
Diagrams of hydraulic valve blocks for different tractor models.
Hydraulic Service Components
Detailed diagrams and part lists for hydraulic service components.
DECALS
Decal Locations and Types
Diagrams showing locations and types of warning and instructional decals on the attachment.
Need help?
Do you have a question about the M200 2009 and is the answer not in the manual?
Questions and answers