A plastic protective coating is provided on the screen protector that must be pulled off before
touching the screen with the pen.
►
Carefully lift off the protective plastic coating at the angled corner. Now you can carefully pull
off the protective coating (see illustration).
The screen protector is now transparent.
►
Wipe the screen protector with a soft dry cloth to remove any low-tack adhesive.
This will help prevent the pen tip from squeaking.
The screen protector is now installed.
i
The adhesive sets completely within 48 hours.
A26391-K279-Z220-1-7619, edition 1
Important notes
7