Page 2
For automatic driver updates, go to: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
Page 5
LIFEBOOK T732 Operating manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
Page 6
Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
14 = Loudspeakers 6 = Status indicators 15 = Microphone jack 7 = Windows button 16 = Headphone port 8 = Tablet buttons 17 = Memory card slot 9 = ON/OFF switch 18 = ON/OFF switch for wireless components Fujitsu...
Page 14
1 = DC input connector (DC IN) 3 = USB port with charging function (Anytime USB charge, USB 3.0) 2 = HDMI port Rear 1 = Security Lock device 3 = USB ports (USB 2.0) 2 = VGA monitor port 4 = LAN port Fujitsu...
Page 15
5 = Battery charge status indicator 2 = Memory service compartment 6 = Port for port replicator 3 = Attachment eye for the pen cord 7 = Ventilation slot cover 4 = Battery with SIM card slot under the battery Fujitsu...
(e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...
► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 102). Fujitsu...
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...
► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
► During installation, follow the instructions on screen. If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". Fujitsu...
Please refer to the notes in "Important notes", Page Status indicators Statusindicators Symbols The status indicators provide information about the status of the power supply, the drives and the keyboard functions etc. Fujitsu...
Page 23
Scroll Lock indicator Indicator is lit: The key combination has been pressed. The effect that this key has varies between applications. Lock Workstation indicator The indicator is illuminated: The security functions of the Notebook have locked your workstation. Fujitsu...
Start - (Settings) - Control Panel - System and Security - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...
You must note that the display cannot be turned completely on its own axis! From notebook to Tablet PC ► Raise the LCD display into a vertical position. Fujitsu...
Page 27
► Hold the screen as low as possible on both sides. Turn the screen to the left or right in the direction of the arrow. At first you will feel some slight resistance, then it will turn easily and without friction. ► Turn the display further until it has turned 180° and the hinge latches in. Fujitsu...
Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings. Profiles for operating with various different screen modes can be selected via the Fujitsu Tablet Control option in the Fujitsu menu.
Switching off the notebook Notebook ► Close all applications and then shut down the operating system (please see the "Operating System Manual"). ► Slide the ON/OFF switch towards the right. The ON/OFF switch returns automatically to its original position. Fujitsu...
Handwriting recognition under Windows 7 currently supports the following languages: English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch, Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. Fujitsu...
LCDscreen Notes High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.
Opening a context menu (click with the right mouse button) tip. Keep the finger tip pressed against the touchscreen. The context menu appears. ► Position one finger on the touchscreen and Moving the cursor move the finger in the desired direction. Fujitsu...
Page 34
► Position two fingers on the touchscreen. ► Move your fingers upwards to scroll up. ► Move your fingers downwards to scroll down. Rotating ► Position the thumb on the touchscreen, then turn the picture clockwise or counter-clockwise using your index finger. Fujitsu...
Page 35
► Position two fingers on the touchscreen and move them apart to increase the view. ► Position two fingers on the touchscreen and move them together to decrease the view. ► With two fingers, tap twice briefly in quick Blocking context-sensitive menus succession on the touchscreen. Fujitsu...
Replace the stylus tip if it is worn. The warranty does not cover a scratched screen. While writing, you should take care not to scratch the surface of the display (e.g. with a wristwatch or bracelet). Fujitsu...
Place the pen tip directly on the screen. Setting the pen Operating system Menu Windows 7 Under Hardware and Sound – Pen and Input Devices in the Control Panel you can change various settings for the pen (assignment and function of the pen button). Fujitsu...
You should attach the pen with a pen cord to prevent accidentally dropping or losing it. ► Attach the end of the pen cord with the smaller loop to your pen. ► Attach the end of the pen cord with the larger loop to your notebook. Fujitsu...
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
Page 40
► Press and hold the left button and drag the item to the desired position with the finger on the touchpad. The item will be moved. Switching the Touchpad on and off You can switch the Touchpad on and off using a key combination, "Key combinations", Page Fujitsu...
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
Page 42
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Start key The Start key opens the Windows Start menu. Startkey Menu key The Menu key invokes the menu for the marked item. Fujitsu...
Further information about the status indicators can be found in chapter "Status indicators", Page Country and keyboard settings If you want to change the country and keyboard settings, proceed as follows: ► Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options. Fujitsu...
This key combination increases the brightness of the screen. Fn+F7 Screenbrightness Decrease volume This key combination reduces the volume of the internal loudspeakers. Fn+F8 Volume Increase volume This key combination increases the volume of the internal loudspeakers. Fn+F9 Volume Fujitsu...
Page 45
Port Replicator. Halt current operation This key combination can be used to halt an operation instantly Ctrl without clearing the keyboard buffer. Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Tabback Fujitsu...
The tablet buttons have different uses in different modes. In addition, you can still individually program some of the tablet buttons, "Programming the tablet buttons", Page Fujitsu...
Windows 7: This button locks and unlocks the automatic rotation of the display. Button "A" This button starts the Fujitsu Menu application. You can use this application to change certain system settings. The button is freely programmable. Button "B"...
If you would like to perform a function test of your web cam, there is suitable test software available at "http://www.fujitsu.com/fts/support/index.html". Fujitsu...
To be able to make use of the optimal charging capacity of the batteries, the battery should be completely discharged and then fully recharged. If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Fujitsu...
Working with the notebook Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
Page 51
► Place the battery on the lower edge of the battery compartment (1). ► Slide the battery into the battery compartment until you feel it engage (2). ► Slide the release button into its locked position (3). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
The battery is between 50 % and 100 % charged. Orange The battery is between 11 % and 49 % charged. The battery is between 1 % and 10 % charged. LED not lit The battery is fully discharged. Fujitsu...
The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Slide the release lever in the direction of the arrow (1). ► Now pull the module out of the module bay (2). Fujitsu...
Avoid storing a data carrier in areas subject to high temperatures or humidity. You may use both 8-cm and 12-cm data carriers in the optical drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu...
► Gently pull the drive tray (2) completely out. ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu...
► Prepare for removal, see chapter "Preparing to remove components", Page ► Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). ► Clean the dust chamber. Fujitsu...
Page 57
Working with the notebook ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...
► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged. Memory card Depending on the particular type used, the memory card may protrude slightly from the slot. Fujitsu...
An ExpressCard slot allows an ExpressCard/54 to be used with the computer. Consult the documentation supplied by the ExpressCard’s manufacturer and follow the instructions provided. Never use force when installing or removing an ExpressCard. Make sure that no foreign objects enter the ExpressCard slot. Fujitsu...
► Gently push the card into the slot until you feel it click into place. Do not use any force. Depending on the particular type used, the card may protrude slightly from the slot. Please see the documentation relating to the card for driver installation instructions. Fujitsu...
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...
► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow (1). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
Optional Wireless LAN / Bluetooth / UMTS / LTE wireless components The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Depending on the device configuration you ordered, your device will be equipped with Wireless LAN, Bluetooth and/or UMTS / LTE.
If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used.
Your Port Replicator is a device that enables you to quickly connect your notebook to your peripherals, such as a monitor, printer etc. The features offered by the Port Replicator include standard ports for monitor, audio, mouse and keyboard. You need only dock the notebook in order to use your peripheral devices. Fujitsu...
10 = Adjusting lever of the Port Replicator 4 = DisplayPort 11 = Unlocking lever 5 = VGA monitor port 12 = Connector on the Port Replicator for the docking port on the bottom of the notebook 6 = LAN port 7 = Headphone port Fujitsu...
Before connecting the notebook to the port replicator, check if the setting lever of the port replicator is in the right position. If necessary, adjust the setting lever to the correct position. ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. Fujitsu...
Page 69
► Press down on the notebook’s rear corners so that it locks into position. ► Connect the mains adapter cable to the DC jack (DC IN) of the port replicator (1). ► Connect the power cable to the mains adapter (2). ► Plug the power cable into the mains socket (3). Fujitsu...
If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...
Problems may occur if the notebook is removed from the port replicator during operation. We recommend that you switch off the notebook beforehand or use the Windows function Start (arrow icon) – Undock. ► Pull the release button in the direction of the arrow (1). ► Pick up the notebook (2). Fujitsu...
Brief overview of security functions Detailed information about the security equipment of your device can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on the Internet at "http://www.fujitsu.com/fts/support/index.html". Preparation Security functions Type of protection...
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu Technology Solutions recommends the use of a combination lock. ► Fit the Kensington Lock Cable on the device on your notebook.
The notebook will be rebooted and the new password will come into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...
► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...
► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu...
Setting the Supervisor password ► Select Start - Run. ► Enter the following at the command line: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE. ► Confirm with Enter ►...
► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...
Peripheraldevices Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices Fujitsu...
► First switch on the external monitor and then the notebook. You can also switch back and forth between the external monitor and the notebook’s LCD monitor, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu...
► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...
► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...
If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...
The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...
► Pull off the cover from the notebook in the direction of the arrow (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...
► Fasten the cover with the screw (2). ► Install the battery again (see "Removing and installing the battery", Page 46). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu...
If you install the wrong screws, components may be damaged. ► Slide the cover in direction of the arrow (2). ► Lift the cover off the notebook (3). Fujitsu...
Removing and installing components during servicing Removing a hard disk ► To release the hard disk from the contacts, pull it in the direction of the arrow (1). ► Remove the hard disk from the hard disk compartment (2). Fujitsu...
Removing and installing components during servicing Installing a hard disk ► Place the hard disk into the hard disk compartment (1). ► Push the hard disk in the direction of the arrow (2) until the contacts of the hard disk engage. Fujitsu...
► Install the battery again (see "Inserting battery", Page 47). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...
The notebook’s LCD screen remains blank LCDscreen LCDscreenistoodark Cause Troubleshooting ► Press a key or touch the touchpad. Monitor is switched off. ► Press the key combination to switch the External monitor or television set connected. screen output, see "Key combinations", Page Fujitsu...
Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...
The battery is dead. ► Insert a charged battery. ► Connect the mains adapter to the notebook. ► Check whether the mains adapter is The power adapter is not connected correctly. connected correctly to the notebook. ► Switch the notebook on. Fujitsu...
► Check whether the radio connection is The wireless component is enabled. Despite this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu...
► Press the function key The system configuration information is to access the incorrect. BIOS Setup. ► In the BIOS Setup, select the Exit menu. ► Select the entry Load Setup Defaults. ► Select OK and press the Enter key. Fujitsu...
Page 102
System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...
315.6 mm x 233 mm x 37.5-33.5 mm with rubber feet Weight depending on configuration from 1.8 kg Input devices Keyboard 85 buttons, splash-protected Touchpad 2 keys Tablet buttons 5 buttons + 1 Windows button 1 freely programmable rocker button / eraser Fujitsu...
USB (Universal Serial Bus) 4 x USB 3.0 Audio Headphone port Docking port 100-pin Security Lock Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5 °C ..35℃ –15 °C ..60 ℃ Transport temperature Fujitsu...
Rechargeable battery You will find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". In addition to the main battery, you can order an optional battery which is inserted in the module slot. All rechargeable batteries are 6-cell batteries.
Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...
Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules.
Page 108
Appendix A: WLAN User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
This device must not be co-located or operated in conjunction with any other antenna or transmitter. For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral. Federal Communications Commission statement This device complies with Part 15 of FCC Rules.
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user's right to operate this equipment.
Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation.
Wireless LAN Modes Using this Device Ad Hoc Mode "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks.
Page 113
Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).
Page 114
How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The operating system that your mobile computer comes with has been pre-configured to support the WLAN device.
Page 115
Deactivation Using the Wireless On/Off Switch The WLAN device can be deactivated quickly and efficiently by toggling the Wireless Device On/Off Switch to the Off position. The switch has no effect on non-Wireless LAN models. Wireless Device Switch Figure 51. Wireless Device On/Off Switch Location Disconnection Using the Icon in the Taskbar Note that disconnecting via the icon in the system tray does not turn off the radio;...
Configuring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters: Configuring the WLAN Click the Start button, then select Control Panel.
Troubleshooting the WLAN Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. If you are unfamiliar with the steps required, consult your System Administrator or go to [Start] -> Help and Support ->...
Page 118
Problem Possible Cause Possible Solution Unavailable RF interference from The use of identical or overlapping RF channels can cause interference with the operation of the network Access Points or WLAN device. Change the channel of your Access Point to a channel that does not overlap with connection other wireless the interfering device.
WLAN Specifications Specifications Item Specification Type of network The integrated Intel Centrino Advanced-N 6205 (802.11abgn 2x2) and Atheros XSPAN 802.11a/b/g/n WLAN devices conform to IEEE 802.11a, 802.11b/g, and 802.11n, Wi-Fi based*. Transfer rate (Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined) •...
Using the Bluetooth Device The Integrated Bluetooth module is a wireless device installed in selected Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other.
Page 121
Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.