Table of Contents
Advertisement
Version 1.500
Features Added
Interoperability Requirements
8
• Aux Monitor Point in Audio Control Panel; See
• Audio Monitor Source Tally; See
• Audio/Video Breakaway; See
• Dynamic Channel Mapping; See
• Battery Charging Status in Deployment Center; See
• The following automation commands have been added:
MAESTRO_AUDIO_MIXER_CHANNEL_MAPPING
MAESTRO_AUDIO_MIXER_CHANNEL_DEFAULT_MAPPING
MAESTRO_AUDIO_MIXER_CHANNEL_UNMAPPING
MAESTRO_BACKGROUND_AUDIO_CHANNEL_MAPPING
MAESTRO_BACKGROUND_AUDIO_CHANNEL_UNMAPPING
MAESTRO_BACKGROUND_AUDIO_CHANNEL_DEFAULT_MAPPING
• "Auxiliary" is now a possible selection for the <destInputBus> argu-
ment for the following automation commands:
MAESTRO_BACKGROUND_SELECT
MAESTRO_BACKGROUND_AUDIO_GAIN
MAESTRO_BACKGROUND_STEREO_MODE
MAESTRO_BACKGROUND_AUDIO_BALANCE
MAESTRO_KEYER_SELECT
See the Maestro Automation Interface Protocol Technical Reference
Manual, v1.5 for additional details concerning additions to or changes
in the automation commands.
• Encore router control system version 1.7 or newer, or
• Jupiter router control system version 4.2 or newer when using ES-
Switch on a VM control system, or
• Jupiter router control system version 7.3 or newer when using ES-
Switch on a CM control system, or
• Jupiter router control system 7.5.0 or newer when using ES-LAN on a
CM control system
page 18
page 19
for details.
page 22
for details.
page 32
for details.
page 39
Maestro — Release Notes
for details.
for details.
Advertisement
Table of Contents
