Monitor Follow Configuration; Monitor Follow Table - GRASS VALLEY MAESTRO 1.5 - RELEASE NOTES Release Note

Monitor Follow Operation

Monitor Follow Configuration

Monitor Follow operation is configured using the Monitor Follow table in
the Input/Output Sets group ("4th Step") in the Maestro Configuration
Editor.

Monitor Follow Table

This table is used to describe the connections between matrix router inputs
and matrix router outputs when a channel delegation operation is per-
formed from the control panel at the specified IP Address. Any router input
may be switched to any router output. These router inputs do not neces-
sarily need to be connected to Maestro outputs although many of them will
be Maestro-related as in the examples below.
A separate table must be created for each channel (i.e., for each Maestro
Processor). Each table is given a name and assigned to a channel using the
Channel Setup table. The figures below represent two monitor follow
tables, one named SD-MonFllw which will be assigned to the channel
"WXYZ-SD" and another named HD-MonFllw which will be assigned to
the channel "WXYZ-HD."
Figure 2 shows a new Monitor Follow table. An explanation of the table
entries appears below the table.
Figure 2. Monitor Follow Table
IP Address
The IP address of the control panel (hardware control panel or GUI PC
panel server card) from which channel delegation operations may be per-
formed which should cause monitor follow router switches. The source for
the available selections is the Network Description table.
Maestro — Release Notes 13