Table of Contents
Advertisement
Version 1.500
Re-compiling the Configuration File
46
It is highly recommended that all configuration sets to be used with
Maestro software version 1.5 be recompiled with the v1.5 Configuration
Editor. This will add Bkgd D as an available input for embedded audio
breakaways.
Recompiling is required if performing a software update when the prior
software was v1.3 or older. Changes have been made to the structure of the
Monitor Follow configuration table.
1. Launch the Maestro Configuration Editor by going to "Start > All
Programs > Thomson > Maestro Configuration Editor."
2. Select the Maestro configuration set to be re-compiled by going to "File
> Open > Thomson" and selecting the set.
This should be the configuration set created for v1.500 use
page
41).
3. If the system displays a Validation Report, you must check the
indicated table(s) and make corrections as indicated.
You can use the links in the Description column to display the table(s).
4. Save the configuration file.
5. Compile the file by going to "File > Compile Channel Data."
6. Proceed to
Updating the System Configuration and Software
(Step d
on
below.
Maestro — Release Notes
Advertisement
Table of Contents
