Table of Contents
Advertisement
Maestro Release Notes
Purpose
Features Modified From Previous Software Versions
Maestro — Release Notes
This document provides software installation instructions for the 1.500
software release of the Maestro Master Control System. This release pro-
vides additional functionality and corrects certain software problems asso-
ciated with the previous releases. However, some functions are net yet
available, as noted in the separate v1.500 Release Notes Addendum. The
Release Notes Addendum also provides a list of software corrections
included with this release.
• Monitor Follow configuration has changed substantially from its intro-
duction in version 1.3. Although the manner in which the feature oper-
ates has not changed, the configuration of Monitor Follow is much
more flexible compared to its implementation in software version 1.3.
See
page 12
for details.
Note
The Monitor Follow configuration discussion in this document supersedes
the Monitor Follow configuration discussion on pages 65-67 in the Maestro
1.3 Release Notes. Beginning with software release 1.4, Monitor Follow oper-
ates as documented in these release notes.
• Responses from Maestro to automation commands now use Command
ID Matching. Previously, the Command ID was set to "1" or consecu-
tive numbers starting with "1" when returning multiple responses.
With version 1.5, the Command ID responses are matched to the orig-
inal automation command. Since the initial release of the automation
protocol, Command ID Matching has been planned and has now been
implemented.
• Automation can now assign a source to a keyer even if there is already
a source assigned to that keyer and that keyer is preset for the next tran-
sition.
1.500
Version
February 12, 2008
7
Advertisement
Table of Contents
