Related Manuals for Fisher Scientific Isotemp 58
Summarization of Contents
Safety Information
Alert Signals
Explains warning, caution, note, and hot surface symbols for safety.
Installation
Selecting a Location
Guidance on choosing a suitable and safe placement for the furnace.
Unpacking
Instructions for safely removing the furnace and accessories from its packaging.
Preparing the Furnace
Steps to prepare the muffle furnace for its initial operation.
Operation
Power on Reset
Procedure for resetting the furnace upon initial power-up.
Entering a Set Temperature
How to input and adjust the desired operating temperature for the furnace.
Setting the Display Offset
Instructions for calibrating the temperature display to a reference standard.
Example Offset
Illustrates the process of setting the display offset for temperature calibration.
Open Thermocouple
Troubleshooting steps for an open or disconnected thermocouple.
Over-Temperature Indicator
Explanation of the indicator and safety relay action for excessive temperatures.
Service
Replacing a Heater
Step-by-step guide for replacing a defective heating element in the furnace.
Replacing the Thermocouple
Detailed instructions for removing and installing a new thermocouple.
Need help?
Do you have a question about the Isotemp 58 and is the answer not in the manual?
Questions and answers