Advertisement
Quick Links
60
8935FC
4-Channel Fiber Optic to 4-Channel Electrical Conversion Module
Key Features
•
Four-channel SD/HD-SDI fiber receiver
(each SFP-DRX SPF has dual single-mode
PIN receivers)
•
Also supports DVB ASI, AES, and Grass
Valley audio TDM interface
•
Supports up to two SFP-DRX-1 devices for
up to four fiber-optic inputs
•
Two reclocked outputs for stable long
distance reception of each optical feed
•
Reclock bypass for non-SDI signal types
•
Inputs accommodates 1310 nm and
CWDM wavelengths
•
Single-mode fiber
•
Can be used with the 8935CF transmitter
and other fiber-ready modules for
distances of between 0 and 50 km,
depending on the transmitter
•
Meets SMPTE 292M/297M/259M signal
specifications
Applications
•
Receiving multiple high-definition video
feeds over long distance fiber connections
•
For receiving implementing SD/HD-SDI
optical tie-lines
•
To provide multi-channel receiving
capability alongside the 8939FCA/8939FCB
for an extremely compact multiplexed
fiber solution
Specifications
Specifications
Supported Frame Types
GeckoFlex
Power Rating
7.5 Watts (with two SFP devices) – single slot
Inputs
Four channels of SD/HD-SDI on single-mode fiber
Connector: Four LC optical connectors
Minimum optical input: -20 dBm
Maximum optical input: -1 dBm
Outputs
Electrical outputs: Two electrical outputs per optical
input
Reclocking:
• SMPTE 292M-1998 at 1.485 Gb/s
• SMPTE 259M-1997 and DVB ASI at 270 Mb/s
Non-reclocking: 1 to 540 Mb/s, AES 3id-2001 and
MADI
Return loss:
• 15 dB 5 MHz to 540 MHz
• 10 dB 540 MHz to 1.5 GHz
Electrical length: Reclocked at 270 Mb: 10 ns,
Reclocked at 1.5 Gb: 8 ns
Bypass: 7 ns
The 8935FC is a four-channel optical to
electrical broadcast-quality fiber optic receiver
module with two electrical outputs per
channel. It can accommodate SD/HD-SDI
video 270 Mb/s to 1.5 Gb/s as well as DVB
ASI, unbalanced AES, and Grass Valley audio
TDM interfaces. The optical circuitry is housed
in dedicated strapmount SFP submodule
devices mounted on the module circuit board.
To construct a four-channel solution, select two
of the SFP-DRX-1 SFP dual receiver devices.
The SFP-DRX-1 supports both 1310 nm
wavelengths and CWDM wavelengths (1270
nm to 1610 nm). This replaceable SFP
optical technology allows for easy upgrade,
reconfiguration, and servicing.
Parameters are controllable via our NetConfig
web browser interface for configuration. The
popular NetCentral application provides health
monitoring for modular products as well as
many other Grass Valley products.
Equalizer #1
Dual RX SFP
RX #1
Ch1
RX #2
Equalizer #2
Ch2
Fiber
Inputs
Equalizer #3
Dual RX SFP
RX #3
Ch3
RX #4
Equalizer #4
Ch4
Modes of Operation
The 8935FC supports following modes of operations:
• Auto reclock 270 Mb/s / 1.5 Gb/s / bypass mode
• Auto reclock 270 Mb/s / 1.5 Gb/s mode
• Fixed reclock 270 Mb/s mode
• Fixed reclock 1.5 Gb/s mode
• Fixed bypass mode
Environmental
Operating temperature range: 0 to +45°C
Non-operating temperature range: -10 to +70°C
Humidity: 90% non-condensing
8935FC-R
J1
J2
Ch 1
Output
J3
J4
Ch 2
Output
J5
J6
Ch 3
Output
J7
J8
Ch 4
Output
2
3
Fiber In
Connector
1
4
IN
IN
Bypass
Cable Driver #1
Reclock
Bypass
Cable Driver #2
Reclock
Bypass
Cable Driver #3
Reclock
Bypass
Cable Driver #4
Reclock
Ordering Information
Ordering Information
This module can be mounted in a single slot in
a GeckoFlex frame but not in other 8900 series
frames, including Gecko-A or Gecko-V frames.
8935FC
Optical to electrical converter, front and 8935FC-R rear
module set
Important order note: two SFP devices are required
for the full operation of the 8935FC module.
SFP Device
SFP-13103G-M1DRX-K – 1270 nm > 1610 nm dual
receiver kit containing fiber optic submodule, mounting
bracket, and fiber cable assembly
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
CH 1
Output
CH 2
Output
CH 3
Output
CH 4
Output
Fiber In
Connector
Ch1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
Ch 7
Ch 8
Advertisement
