Related Manuals for Hay 5G
Summarization of Contents
Information on Support Bars
Support Bar Positions
Details the correct placement of support bars based on frame profile length for optimal stability.
Table Wall Connector
Wall Connector Installation
Instructions for attaching wall connectors to the frame profile facing the wall.
Wall Connector Placement and Fixing
Marking and securing wall connectors based on height measurements for high and low tables.
Front Shelf Connector
Front Shelf Connector Installation
Mounting shelf connectors onto the groove at the bottom of the shelf.
Connecting Front Shelf Connector
Angling and locking the shelf connector to the table frame groove.
End Shelf Connector
End Shelf Connector Mounting
Unscrewing set screws and mounting the end shelf connector with screws.
Securing End Shelf Connector
Connecting the table and ensuring the connector locks into the table frame groove.
End Tray Connector
End Tray Connector Attachment
Connecting the table, ensuring the connector locks into the table frame groove.
Finalizing End Tray Connector
Securing the end tray connector from below using screws.
Cable Tray
Cable Tray Mounting
Angling and sliding the tray into the table's support bar groove to lock it.
STEP Module Installation
Mounting connectors for a STEP module and securing the module with screws.
Cable Clip
Cable Clip Installation
Clicking cable clips from below into the groove on the table frame or support bar.
Cable Guide
Cable Guide Mounting
Pressing the cable guide into the groove on the inside of the table leg and inserting cables.
Plug Socket
Plug Socket Installation
Pulling cables through holes and connecting them to the sockets.
Securing Plug Sockets
Fastening the plug sockets from the bottom using screws.
Need help?
Do you have a question about the 5G and is the answer not in the manual?
Questions and answers