Source Audio/Video Input Connections - Russound CAV66 1 Instruction Manual

INSTALLER
MAKING CONNECTIONS

Source Audio/Video Input Connections

The CAV6.6 supports up to six audio/video
sources. The Source Inputs are located at the
back panel. Connect each source output using
quality RCA signal cables. Connect the Video, and
the Left and Right Audio outputs from each
source to the corresponding inputs on the
CAV6.6 controller. Label each cable with the
name of the selected source and the Source
Audio/Video input number located on the CAV6.6.
Source IR Connections
Each source component has a designated IR
port on the back of the CAV6.6. This IR port is
directly below the Source Audio/Video
Input/Output Connections.
30
1. Using an IR emitter (the Russound 845.1 is
recommended) attach the end of the emitter
"
with the 1/8 plug to the IR emitter port below
the source input.
2. Remove the adhesive back at the other end
of the emitter and attach the emitter over the
source component's IR window.
3. In order to control this source component
with IR, the source must be selected at the key-
pad receiving the command.