Related Manuals for SCHUNK KSP3-LH plus 160
Summarization of Contents
General
About this manual
Provides information for safe and appropriate product use, including warning labels.
Sizes, Warranty, and Scope of Delivery
Details product sizes, warranty conditions, and the scope of delivery.
Basic Safety Notes
Intended Use and Personnel Qualification
Defines correct product usage and emphasizes the need for qualified personnel.
Personal Protective Equipment and Safe Operation
Specifies PPE required and provides guidelines for safe handling and operation.
Fundamental Dangers and Particular Risks
Highlights general dangers and specific operational risks to be aware of.
Assembly and Connection
Assembly of Clamping Block on Machine Table
Provides instructions for mounting the clamping block onto a machine table.
Mounting Clamping Block on Base Plate
Details mounting the clamping block onto ABP-h, ABP-a, or SBP base plates.
Pneumatic System Setup
Covers supply lines, air coupling, dynamic pressure monitoring, and circuit diagram.
Troubleshooting
Chuck Jaws and Piston Issues
Addresses problems with chuck jaws not moving or piston movement failures.
Clamping Force and Stroke Issues
Covers troubleshooting for incomplete stroke, weakening force, and jerky movement.
Monitoring Function Issues
Troubleshoots issues with jaw stroke position monitoring functions.
Maintenance and Care
Notes, Intervals, and Lubrication
Covers notes on parts, maintenance intervals, and lubrication procedures.
Cleaning and Leak Testing
Details basic cleaning procedures and how to perform a leak test.
Assembly Device
Provides dimensions for the assembly device used for maintenance.
Sealing Kits, Accessory Kits and Parts Lists
Sealing Kit Lists
Lists available sealing kits for piston chamber and monitoring.
Accessory Kits
Lists available accessory kits for different product sizes.
Parts Lists
Provides parts lists for 'Standard stroke', 'Long stroke', and 'fixed jaw' variants.
Assembly Drawings
KSP3, KSP3-LH Assembly Drawings
Shows exploded assembly views for KSP3 and KSP3-LH variants.
KSP3-F Assembly Drawings
Shows exploded assembly views for the KSP3-F variant.
Appendix on Declaration of Incorporation
Basic Safety and Health Protection Requirements
Details basic safety and health protection requirements for the incomplete machine.
Protection Against Mechanical Hazards
Addresses various risks related to mechanical hazards in machinery.
Information and Supplementary Requirements
Covers information, warnings, instructions, and supplementary safety requirements.
Need help?
Do you have a question about the KSP3-LH plus 160 and is the answer not in the manual?
Questions and answers