Related Manuals for Phoenix Contact ILC 350 Series
Summarization of Contents
Please observe the following notes
User group of this manual
Defines the target audience and their required qualifications for using the manual.
Explanation of symbols used and signal words
Explains safety symbols, signal words (Danger, Warning, Caution), and information symbols.
How to contact us
Provides information on obtaining up-to-date product information and support.
Foreword
Purpose of this user manual
Explains the manual's purpose: to help start up and operate Inline controllers.
Hardware and software requirements
Lists necessary hardware components and specific software versions for the controllers.
Description of the Inline controller
General description of the Inline controller
Provides an overview of the Inline controllers, highlighting similarities and differences.
Examples of topologies with INTERBUS
Illustrates typical system configurations using INTERBUS.
Examples of topologies with PROFINET
Shows example system configurations using PROFINET.
Unpacking the Inline controller
Details the procedure and safety precautions for unpacking the controller.
Connection and operating elements
Identifies and describes the physical connection and operating elements of the controller.
Diagnostics and status indicators
Explains the meaning of various LEDs and status indicators for diagnostics.
Mode selector switch
Describes the function and operation of the mode selector switch.
Reset button (concealed)
Details the location and operation of the concealed reset button.
Parameterization memory
Explains the necessity and usage of parameterization memory (CompactFlash cards).
Inserting the parameterization memory
Provides instructions for physically inserting the parameterization memory.
Parameterization memory and Internet Explorer
Describes how to manage files on the memory using Internet Explorer.
Internet Explorer FTP functionality
Details the steps to activate FTP view in Internet Explorer for memory access.
Activating/deactivating the FTP server
Explains how to activate or deactivate the FTP server for security.
Activating/deactivating the HTTP server
Details how to activate or deactivate the HTTP server for security.
Internal basic circuit diagram
Presents a schematic diagram of the controller's internal circuitry.
Mounting and removing the Inline controller
Provides instructions for installing and uninstalling the controller.
Communication paths
Outlines the available communication methods (Ethernet, PRG).
Ethernet
Details the Ethernet connection, including pin assignments and cable requirements.
Serial PRG interface (mini-DIN socket)
Explains the serial programming interface and connection requirements.
INTERBUS
Describes INTERBUS connection options (local bus, remote bus).
Power supply
Covers sizing and selection of appropriate power supplies.
Connecting the power supplies
Details how to connect external power supplies to the controller.
The Inline controller under PC Worx
Software version
Lists required PC Worx software versions for controller operation.
IP address
Explains how to set and manage the controller's IP address.
Setting the realtime clock
Describes how to set the controller's internal system clock using PC Worx.
Download changes (ILC 330 ETH / ILC 350 ETH / ILC 350 ETH/M)
Explains the "Download Changes" function for updating controller projects.
Function blocks for handling files on the parameterization memory
FILE_OPEN
Describes the FILE_OPEN function block for opening files.
FILE_CLOSE
Details the FILE_CLOSE function block for closing files.
FILE_READ
Explains the FILE_READ function block for reading file data.
FILE_WRITE
Describes the FILE_WRITE function block for writing file data.
FILE_REMOVE
Details the FILE_REMOVE function block for deleting files.
FILE_TELL
Explains the FILE_TELL function block for determining file pointer position.
FILE_SEEK
Describes the FILE_SEEK function block for moving the file pointer.
FILE_NOTIFY
Details the FILE_NOTIFY block for monitoring file changes.
Function blocks for TCP/IP communication
IP_CONNECT
Explains the IP_CONNECT block for establishing TCP/IP connections.
IP_USEND
Details the IP_USEND block for sending data over TCP/IP.
IP_URCV
Explains the IP_URCV block for receiving data over TCP/IP.
Error codes
Lists error codes for TCP/IP communication.
System variables and status information
System variables
Introduces system variables for diagnostics and control of the bus system.
Status register for local digital inputs and outputs
Lists system variables for reading/writing digital I/O states.
Status register of a PROFINET controller
Details system variables for PROFINET controller status.
INTERBUS registers for the ILC 350 PN
Mentions INTERBUS registers available as process data.
Diagnostic status register
Explains system variables for reading the diagnostic status register.
Diagnostic parameter register
Describes the diagnostic parameter register for additional error information.
IEC 61131 runtime system
Lists system variables related to the IEC 61131 runtime system.
Control processor
Details system variables for the control processor's diagnostic status.
Battery, realtime clock, memory card
Lists system variables for battery, clock, and memory card status.
Power supplies
Lists system variables related to power supply status.
Ethernet status
Lists system variables for Ethernet port status.
Mode selector switch
Lists system variables reflecting the mode selector switch position.
System time
Lists system variables for accessing the system time.
Status information of each PROFINET device
Details status information variables for PROFINET devices.
Technical data and ordering data
Technical data
Presents general technical specifications and data for the controller.
24 V main supply UM
Details technical specifications for the 24 V main supply.
24 V segment supply Us
Provides technical specifications for the 24 V segment supply.
24 V supply UILC
Details technical specifications for the 24 V ILC supply.
7.5 V communications power (potential jumper)
Lists technical specifications for the 7.5 V communications power.
24 V analog supply (potential jumper)
Details technical specifications for the 24 V analog supply.
INTERBUS
Provides technical data related to INTERBUS connectivity.
Number of devices in the INTERBUS system
Specifies the maximum number of devices in an INTERBUS system.
Network interface
Details specifications for the Ethernet network interface.
Inline local bus
Provides specifications for the Inline local bus.
INTERBUS remote bus
Lists specifications for the INTERBUS remote bus.
Diagnostic interface
Details specifications for the diagnostic interface.
PROFINET functions (ILC 330 PN / ILC 350 PN)
Provides PROFINET function specifications.
Digital inputs
Lists technical specifications for digital inputs.
Digital outputs
Details technical specifications for digital outputs.
Diagnostics and status indicators
Summarizes diagnostics indicators for various systems.
IEC 61131 runtime system
Lists technical data for the IEC 61131 runtime system.
Realtime clock
Provides technical specifications for the realtime clock.
Ambient conditions
Details environmental operating and storage conditions.
Conformance with EMC Directive 2014/30/EU
Lists compliance with EMC directives and noise immunity tests.
Noise emission test according to EN 61000-6-4
Details noise emission test standards.
Ordering data
Products
Lists order numbers and quantities for Inline controller products.
Accessories
Lists order numbers and quantities for accessories like memory and cables.
Software
Lists available software and ordering information.
Documentation
Lists available documentation and order numbers.
Appendix for document lists
List of figures
Provides a list of all figures in the document with their page numbers.
List of tables
Provides a list of all tables in the document with their page numbers.
Need help?
Do you have a question about the ILC 350 Series and is the answer not in the manual?
Questions and answers