Related Manuals for Side-Power SE80
Summarization of Contents
Bow Installation Instructions
Bow Installation Considerations and Precautions
General safety and installation advice for bow thrusters, including compartment requirements and ventilation.
Thruster Measurement Specifications
Detailed measurements (ID, H, W, L, WD, TL, T) for various thruster models.
Thruster Model Specifications
Technical specifications including DC system, thrust, boat size, propulsion, power, weight, and battery capacity.
Technical Component Specifications
Details on motor, gearhouse, bracket, tunnel, propeller, batteries, max use, and safety features.
Optimal Thruster Positioning
Guidance on placement for leverage and depth to ensure performance and reduce noise.
Tunnel Length Requirements
Optimal tunnel length considerations, factors affecting it, and consequences of incorrect length.
Sailboat Tunnel Installation Methods
Specific methods for installing tunnels in sailboats with flat bottoms and shallow drafts.
Water Flow Deflection Techniques
Methods to reduce drag and damage from water flow around the tunnel, including recesses and deflectors.
Tunnel End Design for Performance
Importance of rounded or angled tunnel ends for maximizing thrust and minimizing noise and cavitation.
Hull Tunnel Installation Procedure
Step-by-step guide for cutting the hull, preparing the tunnel, and fiberglassing it into place.
Thruster Installation Instructions
Installation Considerations and Precautions
General safety and handling advice for thruster installation, focusing on care and electrical precautions.
Gear Leg and Motor Bracket Mounting
Detailed steps for installing the gear leg and motor bracket, including alignment, sealing, and torque.
Propeller and Anode Installation
Procedures for installing the propeller, lock nut, anode, and applying antifouling.
Motor Mounting and Coupling
Steps for mounting the motor onto the motor bracket, ensuring correct coupling and support.
Thruster Electrical System Wiring
Guidance on wiring the thruster, including battery, fuse, main switch, and cable connections.
DC Electrical System Specifications
Table detailing electrical specs: voltage, CCA, current draw, cable size, and fuse ratings for models.
Control Panel Wiring and Connection
Instructions for connecting control panels using Y or T connectors, and info on plug-and-play setup.
Bow Thruster Wiring Diagram
A schematic showing electrical connections for the thruster system, including control box and motor.
Electronic Control System Wiring
A detailed wiring diagram illustrating the electronic interface box, motor, and power connections.
Control Panel Mounting Procedure
Guide for selecting a location, cutting a hole, and mounting the control panel with gasket and screws.
Stern Thruster Installation
Stern Thruster Installation Overview
Introduction to stern thruster installation, noting extra considerations and referring to a separate manual.
Post-Installation Procedures
Pre-Delivery Checklist
A checklist to verify all installation steps and components are correctly fitted and secured before delivery.
Spare Parts Information
Information on obtaining spare parts and a recommendation to visit the website for the latest list.
Warranty Statement Details
Details the warranty terms, duration, coverage, and procedures for claims.
Need help?
Do you have a question about the SE80 and is the answer not in the manual?
Questions and answers