Related Manuals for Side-Power SE-130/250
Summarization of Contents
Installation Considerations
Bow Installation Considerations and Precautions
Safety and placement advice for bow thruster installation.
Thruster Installation Considerations and Precautions
General safety and handling advice for thruster installation.
Thruster Measurements
Key dimensions and measurements for various thruster models.
Thruster Specifications
Performance data including thrust, power, and boat size suitability.
Technical Specifications
Details on motor, gear house, tunnel, propeller, and safety features.
Positioning of the tunnel / thruster
Guidance on optimal thruster placement for leverage and depth.
Tunnel Length
Factors influencing optimal tunnel length for performance and cavitation.
Standard Use
Tunnel length for standard installation to ensure propellers are not extruding.
Flat Bottom Hull
Longer tunnel needed for flat bottom hulls to prevent vacuum.
High-Speed Boats
Increased tunnel length protects propeller from water forces at high speed.
Tunnel installation in sailboats
Adapting tunnel installation for sailboats with flat bottoms and shallow drafts.
Water Deflection
Managing water flow around the tunnel to prevent drag and damage.
Tunnel Ends
Ensuring rounded or angled tunnel ends for maximum thrust and minimal noise.
Installation Procedures
Tunnel Installation
Step-by-step guide for fitting the tunnel into the hull using fiberglass.
Stern Tunnel Installation
Specific considerations and procedures for stern thruster installations.
Gear Leg & Motor Bracket Installation
Instructions for mounting the gear leg and motor bracket to the tunnel.
Propeller Installation
Steps for securely fitting the propeller, washer, lock nut, and anode.
Motor Installation
Guidance on mounting the motor onto the motor bracket and securing it.
Thruster Electrical Installation
Wiring the thruster motor, including battery, fuse, and main switch.
Electrical Specifications
Table detailing cable sizes, fuse ratings, and battery CCA for different models.
Control Panel Cable Installation
Connecting control panels to the thruster system using Y or T connectors.
Control Panel Installation
Finding a location and mounting the control panel onto the dash.
Final Checks and Support
Pre-delivery Checklist
A comprehensive checklist to ensure all installation steps are completed correctly.
Spare Parts
Information on obtaining replacement parts for the thruster system.
Product Templates and Additional Resources
Links to further documentation and resources for Side-Power products.
Warranty statement
Terms and conditions of the product warranty for defects and service.
Need help?
Do you have a question about the SE-130/250 and is the answer not in the manual?
Questions and answers