Remote Reset; Power Reset; Factory Reset; Camera Reset - Honeywell HJZTP User Manual

6.10.3 Remote Reset

Select 'RESET' in the camera setup menu, then press 'aux' to display the reset menu as
shown below:
A U X
P O W E R

6.10.3.1 Power Reset

To perform a power reset on the dome, select 'POWER' in the reset menu, then press
'aux'. The keyboard will be locked for 30 seconds whilst the dome resets, and the
following message will be displayed:

6.10.3.2 Factory Reset

To perform a factory reset on the dome, select 'FACTORY' in the reset menu, then press
'aux'. The keyboard will be locked for 30 seconds whilst the dome resets, and the
following message will be displayed:

6.10.3.3 Camera Reset

To perform a camera reset on the dome, select 'CAMERA' in the reset menu, then press
'aux'. The keyboard will be locked for 12 seconds whilst the camera resets, and the
following message will be displayed:

6.10.4 Digital Zoom

Select 'ZOOM' in the camera setup menu, then press 'aux' to display the zoom menu as
shown below:
A U X
D I
Press 'aux' to toggle the digital zoom setting between 'OFF' and 'ON'.
Once the required digital zoom setting has been set, press 'lock' to exit the menu.
Rev. 1.01
HONEYWELL VCL PROTOCOL, CONTINUED
= S E N D
C A M E R A
P O W E R
F A C T O R Y
C A M E R A
= S E T
G I T A L
32
L O C K
F A C T O R Y
U P R E S E T
R E S E T
R E S E T
L O C K
Z O O M O F F
= E N D
= E N D
900.0570
8-Sept-05