Table of Contents
Advertisement
Mineral and Salt Water Sanitiser
Models: DAR14C, DAR20C & DAR26C
WARNING: Failure to follow these instructions and comply with all
applicable codes may cause serious bodily injury and/or property damage.
The installation of this product should be carried out by a person knowledgeable
in swimming pool plumbing requirements following the installation instructions
provided in this manual.
Please pass these instructions on to the operator of this equipment.
AquaReviva
Installation &
Operating Instructions
Advertisement
Table of Contents
Related Manuals for Davey AquaReviva DAR14C
Summarization of Contents
IMPORTANT INFORMATION ABOUT YOUR SANITISER
Maint. Recommended Total Dissolved Solids (TDS) Levels
Details recommended TDS range for optimal performance and cell life.
Monitor & Maintain Your Sanitiser In-Line Cell
Explains monitoring and maintenance of the electrolytic cell for optimal function.
Balanced Pool Water Chemistry
Highlights the importance of maintaining pH, TA, and Calcium Hardness levels.
INSTALLATION INSTRUCTIONS FOR AquaReviva
Installing the Power Supply
Guide on selecting location and mounting the power supply unit.
Connecting the In-Line Electrolytic Cell
Instructions for connecting the electrolytic cell to the power supply.
Connecting the Flow Switch
Guide on connecting the flow switch to the cell cable.
Connecting the Filter Circulation Pump
Instructions for connecting the pool pump to the power supply unit.
PRE-START UP PROCEDURE
Pool Salt
Guide on adding the correct quantity of pool salt for desired concentration.
Storage and Safety
Important safety precautions for storing and handling pool salt.
EcoMineral SALT
Converting Existing Salt Pools
Instructions for converting existing salt pools to use EcoMineral Salt.
New Mineral Salt Pools
Guidelines for adding EcoMineral Salt and Activator to new mineral salt pools.
OPERATION OF YOUR AquaReviva SALT WATER SANITISER
Control Panel Layout
Identifies and explains the functions of the control panel components.
AquaReviva SPECIAL FEATURES
System Control (Sanitiser Output Dial)
Explains how the output dial controls cell operation time during filtration cycles.
Polarity Indicators A & B
Describes the function of polarity LEDs in indicating cell operation.
Low Salinity Indication
Explains how the system indicates low salinity and potential issues.
AUTOMATIC TIME CLOCK OPERATION
Timer Setting and Functions
Details how to set the clock and timer functions for automatic operation.
TO CLEAN THE AquaReviva IN-LINE CELL
Method
Step-by-step guide for cleaning the electrolytic cell using acid solution.
Safety Device
Information on safety features like Flow Switch and Thermal Cut-Out.
DAY TO DAY OPERATION
1. Stabiliser
Importance of stabiliser for chlorine retention and recommended levels.
2. pH and Total Alkalinity
Guidance on maintaining correct pH and Total Alkalinity for pool health.
3. TDS Levels
Importance of TDS levels and warnings about incorrect practices.
4. Running Times
Advice on optimal running times to prolong cell life and ensure adequate sanitisation.
CHLORINE PRODUCTION
"Shock" Treatment
Method for boosting chlorine levels when needed.
Chlorine Types and Comparisons / Max Pool Size
Compares AquaReviva models with other chlorine types and pool sizes.
GENERAL INFORMATION
Pool Water Chemistry Instructions
Table detailing pool water balance parameters and adjustment methods.
Common Terms
Glossary of common terms related to pool water chemistry.
TROUBLE SHOOTING
No Chlorine Production - Check for:
List of checks for issues causing no chlorine production.
Low Chlorine Production - Check for:
List of checks for issues causing low chlorine production.
Need help?
Do you have a question about the AquaReviva DAR14C and is the answer not in the manual?
Questions and answers