Initialize - Samsung SPU-3750T User Manual

Functional Description
25.3. Aux Output
▶ Main Menu/Alarm Setting/Aux Output
AUX Output menu is to operate the camera's peripheral
Main Menu
devices such as lamps and sirens through the controller and
① Camera Setting
switches as well as through network communications.
② Sequence Setting
On/Off :
③ P/T Setting
- Cancels or activates the Aux function.
④ OSD Setting
⑤ Alarm Setting Time :

⑥ Initialize

Enables setting up a duration for the Aux output when the
 Status
Aux command is transmitted from the controller. A
duration can be selected from a minimum of 1 second to a
➡
maximum of 60 minutes.
Alarm Setting
 Alarm Enable OFF
② Alarm Input
③ Alarm Output
④ Aux Output AUX Off
➡
AUX Output
 On/Off
OFF
 Time
00 SEC
Notes
 •   C onnectingthepowerconnectorandGNDincorrectlytotheAuxterminal'sNOandCOM
ports may cause a short circuit and fire, damaging the camera.
 •   T hemaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,and
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera's
lifespan and damage it.
82
SPEED DOME CAMERA
NO NO
⇨
COM COM
AUX On
User's Manual
Functional Description
Initialize
26. Initialization Menu
▶ Main Menu/Initialize
Power On Reset : Restarts the camera.
Main Menu
Factory Default :
① Camera Setting
Enables resetting the camera to its factory default settings.
When the mode is selected, all custom data such as preset
② Sequence Setting
locations is deleted from the camera. Use this function if it
③ P/T Setting
is necessary to reset the settings of the camera.
④ OSD Setting
Camera Default :
⑤ Alarm Setting
This mode can be used if the camera module has been
⑥ Initialize
replaced and you want to keep the camera's existing
 Status
settings for the new module.
➡
To reset the camera, first replace the old module with a
new camera module. When the replacement is properly
Initialize
installed, turn on the module, then execute this command.
Auto Refresh :
① Power On Reset
Enables optimizing the status of the camera's built-in
② Factory Default
electric circuits and components on a regular basis. (A
③ Camera Default
regular operation can be scheduled.)
 Auto Refresh
OFF
This mode can be used to maintain and repair the current
⑤ Auto Track Default
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
⑥ Fan Life
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
The default setting is Off.
- Off, 1~7 Days : Selecting Off disables Auto Refresh and
selecting 1~7 Days automatically executes it after 1~7
days has passed.
✽ Auto Refresh takes approximately 10 seconds to finish. If
Auto Refresh activates in the middle of a sequence action,
the camera pauses the sequence action and performs an
Auto Refresh, then resumes the sequence action once the
refresh is complete.
Auto Track Default :
Enables resetting the Auto Track settings.
Fan Life : Enables setting the Fan Life.
SPEED DOME CAMERA
83
User's Manual