Connection; System Diagram - Samsung SCD-3080 User Manual

Connection

System Diagram

UTP Power Supply Link Setup
1. SUD-3080 4Ch Power Supply 4Ch Receiver
The maximum power transmission distance for the camera is 300m(1000ft), and the
distance between the camera and the 4ch Receiver cannot exceed 900m(3000ft).
SPU-400
300m(1000ft) or Less
900m(3000ft) or Less
SUD-3080
2. UTP Receiver Link Setup(Additional Power input is needed)
SUD-3080 1Ch Passive Receiver DVR
225m(750ft) or Less
1Ch Passive Receiver
COLOR DOME CAMERA
DVR/Monitor/Controller
RS-485
VIDEO
SPU-400R
SCC-3100A
UTP CABLE
BNC CABLE
RS-485
Monitor
16
SUD-3080
Notes
• Using the product with third-party UTP peripherals may result in degradation of product function
and performance.
• Attenuation and distortion in signal may occur if the maximum transmission distance is exceeded.
Please note that depending on the installation environment/condition, the signal may become
attenuated and distorted and cause the camera to function incorrectly even when the transmission
distance is within the maximum.
• If using RS-485 communication, please use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P,
BOSCH, HONEYWELL, VICON and PANASONIC Protocol.
• If you are using the 1Ch Passive Receiver system setup, please connect the adapter (AC 24V or DC
12V) directly to the camera.
UTP CABLE
The camera uses UTP cable for transmitting video signals, power and transferring RS-485 control
data.(TIA/EIA-568B)
No. Line Color Camera to Power Supply
1 White+Orange VIDEO (+)
2 Orange VIDEO (-)
3 White+Green RS485 (+)
4 Blue POWER (-)
5 White+Blue POWER (+)
6 Green RS485 (-)
7 White+Brown POWER (+)
8 Brown POWER (-)
COLOR DOME CAMERA
Power Supply to Receiver
VIDEO (+) / RS-485 (+)
CH1
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH2
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH3
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH4
VIDEO (-) / RS-485 (-)
17
SUD-3080