Samsung SCD-3080 User Manual page 12

High resolution utp dome camera
Hide thumbs Also See for SCD-3080:
Table of Contents

Advertisement

Operating Your Camera
Notes
• An item with the
icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
• An item with the --- icon is unavailable due to function settings.
LENS
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, select LENS by using the Function Setup
switch so that the arrow indicates LENS .
2. The Lens mode has sub menu site as listed below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings mode.
To activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode.
You can adjust the shutter value of ESC shutter mode.
MAIN SETUP
1.LENS
2.EXPOSURE
Notes
• Set the shutter mode to --- if color rolling occurs.
EXPOSURE
MAIN SETUP
1.LENS
2.EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
COLOR DOME CAMERA
DC
DC
22
SUD-3080
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select the shutter.
- ---
: Shutter speed is fixed at 1/60 sec (1/50 sec).
- ESC
: Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL - 1/50sec~1/120,000sec)
- A.FLK
: Select this when you experience picture flicker, this happen when there
is a clash with the installed lighting frequency.
Notes
• Set the shutter mode to --- if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the
picture may become unstable if the camera faces a bright fluorescent light. Therefore,
take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but
the greater the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
COLOR DOME CAMERA
25
---
HIGH
OFF
23
SUD-3080

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sud-3080

Table of Contents