Table of Contents
Advertisement
Operating Your Camera
SSNR3
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR3
2. Select a desired mode using the Function Setup switch.
ON : Activates SSNR3 so that noise is reduced.
OFF : Deactivates SSNR3. Noise is not reduced.
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the
noise reduction level.
Notes
• You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the 'EXPOSURE' menu
is 'OFF'.
• When adjusting the noise reduction level in the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced, as will the brightness of the image.
DAY/NIGHT
You can display pictures in color or in black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Function
Setup switch so that the arrow indicates 'DAY/NIGHT'.
COLOR DOME CAMERA
DC
ATW
OFF
ON
28
SUD-3080
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR3
6.DAY/NIGHT
2. Select a desired mode using the Function Setup switch according to the picture display you want.
AUTO
: The mode is switched to 'Color' in a normal environment, but switches to 'B/W'
mode when ambient illumination is low. To set up the switching time for AUTO
mode, press the Function Setup switch. You can turn on or off the burst signal
on B/W mode.
- BURST MODE : You can turn on or off the burst signal on B/W mode.
- DURATION : You can select the day/night switching point.
- DWELL TIME : You can select day/night switching delay time from.
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
Color ➞ B/W
B/W ➞ Color
Early
2.5 lux
5 lux
Late
1 lux
7 lux
* The day/night switching point of the camera can be adjusted.
EXTERN : This mode allows you to apply a desired filter to external signals.
COLOR : The picture is always displayed in color.
B/W
: The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
COLOR DOME CAMERA
DC
ATW
OFF
ON
AUTO
29
SUD-3080
Advertisement
Table of Contents
