Table of Contents
Advertisement
Operating Your Camera
Notes
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• If you increase the SHARPNESS level too high, the picture may become distorted or
noise may appear.
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates 'CAM TITLE'.
2) Set it to 'ON' by using the Function Setup
switch.
3)
Press the Function Setup
switch
.
4) Use the Function Setup switch to move to
a desired letter and select the letter by
pressing the Function Setup switch.
Repeat this to enter multiple letters. You
can enter up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press
the Function Setup switch. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup switch and press the Function
Setup switch. When the position is determined,
select 'END' and press the Function Setup
switch to return to the SPECIAL menu.
Notes
• When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen
even if you enter one.
• English and Numbers are available in this mode.
• If you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup switch. Move the cursor over the letter to be edited, move the cursor to
the letter to be inserted and then press the Function Setup switch.
COLOR DOME CAMERA
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
C L R P O S E N D
FRONT DOOR
34
SUD-3080
SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL) frequency, you can synchronize the
output phase of multiple cameras using the power
synchronization function (Line-Lock) without using
a synchronization signal generator.
INT : Internal Synchronization Type
L/L : Power Synchronization Type, Line-lock
Press the Function Setup switch.
You can select a desired phase from 0 to 359 when select 'phase'.
Notes
• When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
INTELLIGENCE : Commands the camera to motion-detect and trace an object.
INTELLIGENCE
1. MOTION
2. DETECT BOX
3. ALARM OUT
4. DETECT AREA
5. MASK AREA
6. SENSITIVITY
7. DET. SIZE
8. RETURN
COLOR DOME CAMERA
OFF
ON
OFF
3
3
35
SUD-3080
Advertisement
Table of Contents
