Table of Contents
Advertisement
Connection
RJ-45 Connector Schematic Diagram
Copper Connector
UTP Coating
No.
Line Color
Camera to Power Supply
1
White+Orange
VIDEO (+)
2
Orange
VIDEO (-)
3
White+Green
RS485 (+)
4
Blue
POWER (-)
5
White+Blue
POWER (+)
6
Green
RS485 (-)
7
White+Brown
POWER (+)
8
Brown
POWER (-)
The SUD-3080 uses UTP cable to receive its power (AC24V/AC28V) from the Power Supply.
Therefore, a separate adapter is not required. Please refer to the RJ-45 Connector
Schematic Diagram.
COLOR DOME CAMERA
Power Supply to Receiver
VIDEO (+) / RS-485 (+)
CH1
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH2
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH3
VIDEO (-) / RS-485 (-)
VIDEO (+) / RS-485 (+)
CH4
VIDEO (-) / RS-485 (-)
18
SUD-3080
Using Coaxial Communications
• Coaxial Communications System
• OSD Control method
DVR
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
Notes
• It is recommended that pure copper coax cable is used and not copper coated
steel, as this will cause issues with the communication over the coaxial cable.
COLOR DOME CAMERA
CAMERA
DVR
CONTROLLER
SET
MENU/ENTER
OSD KEY
UP
UP KEY
JOYSTICK UP
DOWN
DOWN KEY
JOYSTICK DOWN
LEFT
LEFT KEY
JOYSTICK LEFT
RIGHT
RIGHT KEY
JOYSTICK RIGHT
•
: BNC
• ---- : RS-485
Distance
Recommended Cable Specification
300m
3C2V(RG-59/U)
450m
5C2V(RG-6/U)
600m
7C2V(RG-11/U)
19
SUD-3080
Advertisement
Table of Contents
