Ceiling Installation - JVC TK-AM200U - Active Movement Color Dome Camera Instructions Manual

Active movement video camera
Hide thumbs Also See for TK-AM200U - Active Movement Color Dome Camera:
Table of Contents

Advertisement

INSTALLATION

Ceiling Installation

1.
75 mm
2.
To ceiling slab
or channel
Wire
M3 screw
Safety wire
attachment
hole
3. -1)
3.
3. -1)
Guide
Tab
4.
Hook
16
1.
Make a hole (75 mm diameter) in the ceil-
ing for passing the connection cables.
2.
Attach the provided ceiling mount to the
ceiling.
Camera
direc-
tion
mark
3 mm
or
less.
Guide
Tab
3. -2)
Connector
cable
White wire
3.
Pass the wired terminal board through the
hole in the ceiling mount and attach it to the
camera body.
Connector
1) Slide the tab on the terminal board into
on terminal
board
2) Connect the connector cable from the
4.
Attach the drop prevention wire.
As shown in the illustration, pull the drop
prevention wire out from the ceiling mount
and attach it to the drop prevention wire
hook on the underside of the camera body.
Drop prevention
wire
Memo:
Bundling the drop prevention wire together with the
cables connected to the terminal board using vinyl
tape will help prevent the cables from being
pinched.
Be sure to attach the drop prevention wire. If
not attached, the camera body could drop
down.
Attach the ceiling mount so that the cam-
era direction mark is aligned with the direc-
tion in which you want the camera to face.
Coincide the center of the mount with the
hole (75 mm diameter) for passing the
cables through the ceiling. Attach the ceil-
ing mount to the ceiling using 4 screws.
Use M4 screws or bolts for attaching the
ceiling mount.
If wood screws are used, use screws with
a diameter of 4.1 mm.
The screw head height should be no more
than 3 mm.
CAUTION:
To prevent the ceiling mount and
camera from dropping down, it is
recommended to connect the ceiling
mount to a ceiling slab or channel with
a wire. Fasten the wire to the safety wire
attachment hole using an M3 screw as
shown in the illustration.
the guide on the camera. When the ter-
minal board is moved in the direction of
the arrow, it is secured to the camera.
camera body to the connector on the ter-
minal board.
CAUTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tk-am200

Table of Contents