Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Inspur AGX-5
Summarization of Contents
Safety Instructions
General Safety Instructions
Provides essential safety precautions, warnings, and guidelines for system operation and handling.
Product Specifications
Overview
General description of the Inspur server NF5888M5 (AGX-5) AI supercomputer platform.
Features and Specifications
Details the technical features and specifications of the server's components like processor and chipset.
Component Identification
Front Panel Components
Identifies and describes components located on the front panel of the server.
Rear Panel Components
Identifies and describes components located on the rear panel of the server.
Motherboard Components
Identifies and describes components on the server's motherboard.
Operations
Power Up and Down the Server
Instructions for powering the server on and safely powering it down.
Server Rack Operations
Procedures for extending, removing, and installing the server in a rack.
Access Panel Operations
Instructions for removing and installing the server's access panel.
Setup
Optimum Environment
Requirements for the optimal operating environment, including space and airflow.
Power and Grounding Requirements
Details electrical regulations, power considerations, and grounding requirements.
Rack Warnings
Important warnings and safety guidelines for rack installation and stability.
Hardware Options and OS Installation
Guidance on installing hardware options and the server's operating system.
BIOS Setup
Common Operations
Key operations and functions within the BIOS setup interface.
Interface Navigation and Information Views
Steps to access BIOS, switch modes, and view system/component information.
RAID Mode Settings
Procedures for configuring and managing RAID modes via BIOS.
BMC Settings
Motherboard BMC Settings Overview
Introduction to BMC management software and its main functions.
Web Interface Navigation and Usage
How to log in and navigate the BMC Web interface for server management.
Power and Fan Management
Management of power supply status, fan speed, and server power control.
Logs and Fault Diagnosis
Accessing and managing system logs and performing fault diagnosis.
System Maintenance and Updates
User administration, security, firmware updates, and factory defaults.
Command Line Interface Operations
Instructions for accessing and using the BMC command line interface.
Common Faults and Troubleshooting
Hardware Problems
Common hardware issues like power failure, no display, LED errors, and fan noise.
Software Problems
Common software issues such as installation failures, memory capacity, and network problems.
Need help?
Do you have a question about the AGX-5 and is the answer not in the manual?
Questions and answers