Download Print this page

Updating The Camera Firmware - Honeywell IPCAM-WO User Manual

User guide
Hide thumbs


Detection Areas window
When an area is activated by checking the box, a transparent colored Detection Area will appear on the screen. You can
drag and resize the box as desired. Click Done when all the areas are configured.

Updating the Camera Firmware

If your camera is not running the latest firmware an update icon will appear.
1. Click on the Tool icon in the lower right corner. The Camera Configuration
window appears.
2. Click the UPDATE AVAILABLE . . . button. Then click OK to the
confirmation window to proceed.
3. During the firmware update process the video image will be replaced with
a tool image. You can continue using other cameras. When the firmware
update completes, normal operation for that camera is restored.
iP Cameras Online Help Guide
– 7 –
Motion detected in
any area will trigger
a video event and
store a video clip or
series of snapshots.

Hide quick links:



  Also See for Honeywell IPCAM-WO

  Related Manuals for Honeywell IPCAM-WO

This manual is also suitable for: