Figure 3-5 Ip Network Settings Obtained Manually - Honeywell EQUIP HCD554IP Reference Manual

Configuring Network Settings
28
4. Under IP Network Setting, enter the following details:
Table 3-3 IP Network Setting Options of the Device
Option
Obtain an IP Address
automatically
Device Name
MAC Address
IP Address
Subnet Mask
Default Gateway
Note Changing the network (IP) settings except for the Device Name will cause the
device to restart.
Caution Check the values for the IP network settings before applying them.
Incorrect values might cause a failure when connecting to the network
camera.
5. Click Apply. The network settings are updated and a message appears in the status
bar, confirming the update.
Note You must click Apply for your changes to take effect. If you close the screen
before clicking Apply, all your new settings will be lost.
Figure 3-5 IP Network Settings Obtained Manually
Description
This option must NOT be checked to assign a static IP
address to the device.
The name of the device
The preset, unique MAC address of the device is used to
identify specific devices.
The IP address of the device on the network
The subnet mask value of the device on the network
The default gateway address that connects the device to
the static network.