White Balance - Honeywell EQUIP HCD554IP Reference Manual

IP Camera Web-Client
Setting Options
ELC (Electronic Light Auto, Manual
Control)
Shutter Speed:
1/60–1/100000 (NTSC)
1/50–1/100000 (PAL)
ALC (Automatic Light DC Iris Level: 1–25
Compensation)
AGC (Automatic Off, 10 dB–30 dB
Gain Control)
BLC (Backlight Off, Low, Mid, High
Compensation)
Flicker Less Off, On
Day/Night Auto, Manual On,
Manual Off
Detect Time 5–60 seconds
DayToNight 1–7
NightToDay 3–9
Night Mode B/W or Color

White Balance

42
Table 4-4 Auto Exposure Settings
Description
For a manual iris lens:
Auto: Camera will perform electronic exposure automatically.
Manual: Adjust the iris by changing the shutter speed manually.
For an automatic iris lens. Adjust the DC Iris Level until the image is
neither too bright nor too dark.
Adjust the maximum value of AGC gain. AGC can be Off, or set from
10 dB–30 dB.
Prevents the object in the center of the image from darkening when
there is excessive light from behind.
Eliminates the "flicker" that can appear in an image under certain
lighting conditions (for example, fluorescent lighting).
Set the moving, mechanical IR filter within the camera to ensure true
24 hour surveillance (HCD554IP/X only).
Sets the time (5–60 seconds) before the camera switches to Day or
Night mode after detecting a low light condition.
Day/Night must be set to Auto.
Determines the low light detection level (1–7) when the camera
switches to Night mode. The lower the value, the darker the lighting
conditions before the camera switches.
Day/Night must be set to Auto.
Note
Determines the low light detection level (3–9) when the camera
switches to Day mode. The higher the value, the brighter the lighting
conditions before the camera switches.
Day/Night must be set to Auto.
Sets the color mode as B/W (monochrome) or Color in Night Mode.
Day/Night must be set to Manual On.
White Balance ensures that color integrity is maintained in the camera image by
compensating for the temperature color "casts" that different light sources can cause. Use
the following table to set up White Balance options.
The DayToNight threshold must be set at least 2 less than the
NightToDay threshold setting.