Advertisement
Divar XF
Quick Install
To get the unit quickly operational, make the connections
described below and then enter the relevant data in the Quick
Install menu. The Quick Install menu appears the first time the
unit is started. When the relevant information is entered, the
unit will be operational.
Connections
Primary connections
1.
Connect the cameras to the BNC camera inputs
(automatically terminated).
2.
Connect monitor A to the BNC, Y/C, or VGA (supporting
1280x1024) output MON A.
3.
Connect (supplied) USB mouse to a USB port.
Optional connections
4.
Connect monitor B to the BNC, Y/C, or VGA (supporting
1024x768) output MON B.
5.
Connect up to 16 audio signals to the RCA audio inputs.
6.
Connect the RCA audio output(s) to the monitor or an
audio amplifier.
7.
Connect up to 16 (alarm) inputs (via the supplied 25-pin
D-type connector board).
8.
Connect up to 4 alarm output relays (via the supplied 25-
pin D-type connector board).
9.
Connect the malfunction output (via the supplied screw
terminal adapter).
10.
Connect an Intuikey keyboard to the KBD In socket and
connect the terminator (supplied with the keyboard) to
the KBD Out socket.
11.
Connect a Bosch pan/tilt/zoom control unit to the
Biphase port (via the supplied 15-pole D-type connector
board).
12.
Connect a third-party pan/tilt/zoom control unit to the
RS485 port (via the supplied screw terminal adapter).
13.
Connect to your network via the Ethernet port.
Powering up
Switch on all connected equipment.
14.
Connect the power cord to the unit.
First-time use
The unit starts with a multiscreen display. The Quick Install
menu opens the first time the unit is used. Fill in the basic
Bosch Security Systems
settings in the four tabs to get the unit operational. The unit
begins recording automatically when the Quick Install menu is
closed.
Navigating
Use the supplied USB mouse. Alternatively, use the following
front panel keys:
–
Use the enter
button to select a submenu or item.
–
Use the arrow
move through a menu or list.
–
Use the escape
button to go back or to
switch off the menu.
Quick Install menu
The Quick Install menu contains four tabs: International,
Schedule, Recording, and Network. Navigate through these
tabs using Back and Next. Click Undo to cancel changes made
in the active tab. Click Close to exit the Quick Install menu.
Changing Quick Install settings overwrites customized settings.
International
Language
Select the language for the menu from the list.
Time Zone
Select a time zone from the list.
Time
Select either a 12 or a 24 hour clock format.
format
Time
Fill in the current time.
Date
Select from three date formats which show
format
either the month (MM), the day (DD), or the
year (YYYY) first.
Date
Fill in the current date.
Schedule
A graphical representation of the currently active weekly
schedule is shown. Each color represents one of the four
available profiles:
–
Yellow - Profile 1
–
Blue - Profile 2
–
Green - Profile 3
–
Pink - Profile 4
–
Light blue - Profile 5
–
Brown - Profile 6
Click Overwrite to start making changes.
–
Select at which day the week should start and end.
–
Select at which time the day begins and ends on
weekdays.
–
Select at which time the day begins and ends on
buttons to
weekends.
The graphical representation is automatically updated when
settings are changed.
Recording
Set the Normal recording Resolution, Quality, and Frame rate
for each profile in the table. Set the Alarm and Motion
recording Resolution, Quality, and Frame rate. These settings
are generic for all four profiles. In case of previously made
advanced settings, click Overwrite to replace them with Quick
install settings.
Network
DVR name
Enter a DVR name to be used in the network.
DHCP
Enable DHCP to have IP address, subnet mask,
and default gateway assigned automatically by
the network server. The actual values are
displayed.
IP address,
Fill in the IP, subnet mask, default gateway,
Subnet
and DNS server addresses when DHCP is
mask,
disabled.
Default
gateway,
and DNS
server
Bandwidth
Restrict the network bandwidth by entering a
limit
value between 0.1 and 100 Mbps for the
bandwidth limit.
MAC
The MAC address is read only.
address
Quick Install | en
3
F.01U.135.430 | v2.5 | 2009.08
Advertisement
