ROSE DISPLAYS ULTRAFRAME Instruction Sheet

UltraFrame™

Parts

Instructions for Hanging

Instructions for Hanging

Step 1

Install wall mounting hangers
between frame rail and backer board (at
top and bottom sides of the frame only).
Line up holes. Fig. 1

Step 2

Place frame in desired position on wall
and locate placement for molly anchors
or wood screws at top and bottom of
frame only. Fig 2

Step 3

Drill holes to accommodate anchors
for drywall or screws for wood. Fig 3

Step 4

Replace frame and screw into wall. Fig 4

Step 5

Open rails, put in poster and
close rails. Fig 5
UltraFrame™ is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #01INSUltraFrame
Incept-4.23.01
Instruction Sheet
Wood Screws or
Molly Anchors
2010SC
16-0016
Figure 1
Figure 3
Wall Mounting
Hangers
06-6067
Figure 2
Figure 4
Figure 5
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
UltraFrame
12UF100