ROSE DISPLAYS GOTCHA WITH ONEUP GOTCHA CLIPS Instruction Sheet

Gotcha

Parts

Instructions For Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert OneUp Gotcha Clips into slot on the
backside of the top Gotcha only. (You should hear
a SNAP" when the clips are inserted properly).
Fig. 2
Note: For best results, place the clips 1/3 of the
way in from each end on the top Gotcha Holder.
Fig. 3

Step 3

Suspend poster.

Important note:

Please save and reuse the Gotcha Holder and the
OneUp Gotcha Clips for future projects.
The Gotcha ® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #00INSGO
Incept-1.12.00
®
Instruction Sheet
Gotcha
12G100
OneUp Gotcha Clips
Figure 1
Tel# 1-800-631-9707 Fax# 1-800-560-2890
Figure 2
Figure 3
35 Congress Street, Salem MA 01970
e-mail:signware@rosedisplays.com