ROSE DISPLAYS GOTCHA FOR SLATWALL Instruction Sheet

GotchaClip

Parts

Instructions For Hanging

Step 1

Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut. Fig. 1
Note: It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.

Step 2

Insert the GotchaClip for Slatwall into slot on the
back side of the top Gotcha Holder only. (You
should hear a "SNAP" when the clip is inserted
properly). Fig. 2

Step 3

Tilt holder and clip at a slight angle and slip the
GotchaClip for Slatwall hooks into the groove in
the slatwall. Fig. 3

Important note:

Please save and reuse the Gotcha Holder and the
GotchaClip for Slatwall for future projects.
Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #00INSGotcha/SWClip
Incept-1.12.00
™
For Slatwall
Gotcha
12G100
Instruction Sheet
GotchaClips
for Slatwall
Figure 1
Figure 2
Figure 3
Tel# 1-800-631-9707 Fax# 1-800-560-2890
35 Congress Street, Salem MA 01970
e-mail:signware@rosedisplays.com