ROSE DISPLAYS ANOSCREEN WITH ANOFOOT Manual

AnoScreen™
Parts
AnoScreen
Corner Bracket
06-3000

Instructions for Assembly

Step 1

Insert corner brackets into ends of
bottom rails, using thumb, as shown
in illustration. 2 brackets per end of
each rail.
DETAIL 1a- Corner bracket tension
tab faces toward outside of frame.

Step 2

Snap one AnoFoot onto both the
left and right sides of each bottom
Ano rail section.

Step 3

Lay out parts as they will be configured
on the floor. (2, 3 or 4 panels)
The AnoScreen™ is a registered trademark of Rose Displays, Ltd. Neither
the manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INAnoScreenAnoFoot
Incept-8.15.02
Instruction Sheet
AnoFoot™
12-0200 Corner Brackets
1
2
Vertical Rails
with Flex Spine
1a
3
4
(continued on other side)
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
Single rails Split rails
2 Panel
3 Panel
4 Panel
e-mail:signware@rosedisplays.com