Table of Contents
Advertisement
Quick Links
Doc. Title
ST300/340 OPERATION MANUAL – LATAM
Concerning
Features and How to set parameters
Operation Manual
Suntech International Ltd.
ST300 Series / ST340 Series
Suntech International Ltd.
CONFIDENTIAL DOCUMENT
This document belongs to intellectual property of Suntech
International Ltd. and shall neither be copied nor be given to any
3rd parties without prior written consent from the company.
DO NOT MAKE ANY COPIES
Author
HG.Park
Doc. No.
Rev.
1.41
Confidential Document
Page of Pages
1 of 146
Date
26 May. 2015
Advertisement
Table of Contents
Related Manuals for SunTech ST340 Series
Summarization of Contents
Overview of ST300/340 Device
Operation Modes
Details the three operation modes: Driving, Parking, and Emergency.
Device Features
Highlights key features like Power Saving, LEDs, Event Lines, OTA, Parking Lock, and Over-Speed.
Communication String Formats
Command Format
Details the format used when the server sends command messages to the device.
Report Format
Shows the format of messages delivered to the server in response to server commands.
Device Configuration Parameters
Network Parameters
Explains parameters for device network connectivity via GPRS authentication, APN, server IP, etc.
Event Parameters
Covers parameters for setting various event triggers, including ignition states, input/output types, and chattering times.
Driver ID Parameters
Covers parameters for managing driver IDs, including adding, removing, and retrieving driver information.
Polygon Geo-fence Parameters
Details parameters for setting polygon geo-fence groups, positions, and enabling/disabling.
Tracking and Route Deviation
Start/Stop Tracking
Explains how to start, stop, and manage vehicle tracking and route deviation status.
Set Tracking Positions
Details setting parameters for defining tracking positions, including latitude, longitude, and gap tolerances.
Reporting to Server
Status Report
Details the structure and fields of the Status Report sent periodically to the server.
Emergency Report
Describes the Emergency Report sent by the device when an emergency occurs.
Alert Report
Describes the Alert Report sent to the server when specific conditions are met.
Travel Event Report
Details the Travel Event Report sent when the vehicle is parked, used for ST300A, ST300H, ST300K.
Keep-Alive Report
Describes the Keep-Alive Report sent to indicate the device is still active.
Data Reporting from External RS232
Details how the device reports data from external appliances via RS232.
Status String Reporting via SMS
Describes how to report status strings via SMS, covering Back-up and Main methods.
Coin Machine Report
Describes the Coin Machine Report, available only for ST300B models.
General Use Commands
Requesting Status
Explains the command to request the current status of the device from the server.
Re-setting Device
Describes the command to reset device parameters to factory defaults and reboot it.
Pre-setting Parameters
Details the command to report all parameters and current device status, including network and event settings.
Enable/Disable Outputs
Commands to activate or deactivate outputs 1, 2, and 3, detailing their behavior.
Requesting Device Information
Explains commands to request IMSI, ICCID, and device version information.
Odometer and RPM Calibration
Details commands for starting, stopping, and requesting odometer/RPM values for calibration.
Various Usages Commands
Erase All Reports Command
Command to erase all saved reports and disable outputs, used for device initialization.
Set Traveled Distance
Commands to set or initialize the vehicle's traveled distance value.
Set Google Map Address
Command to set the Google Map address format for location queries.
Improve Battery Life
Command to optimize battery usage by managing GPS chip activity.
Event Lines and Features Description
14-pin Event Lines
Details the 14-pin connector pinout for events, communication, power, and ground.
Immobilizer Functions
Explains Immobilizer and Immobilizer2 functions, including buzzer alerts and their conditions.
LED Indicators
Explains the meaning of Red (GPS) and Blue (GPRS) LED patterns for status and errors.
Power Saving Modes
Details the Sleep and Deep Sleep modes for reducing device power consumption.
Motion Sensor
Explains motion sensor activation, thresholds, and detection states for collision and shock.
Anti-Theft Systems
Covers Anti-Theft activation, deactivation, door sensor integration, and shock protection.
Odometer and RPM Calibration
Provides instructions for calibrating odometer and RPM readings using ignition or commands.
I-button Functionality
Details the functionality of the I-button for driver identification, registration, and vehicle control.
Need help?
Do you have a question about the ST340 Series and is the answer not in the manual?
Questions and answers