SpectraLink 77 Series Manual
  1. Manuals
  2. Brands
  3. SpectraLink Manuals
  4. Cordless Telephone
  5. 77 Series
  6. Manual

SpectraLink 77 Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Spectralink 75xx, 76xx, 77xx, Butterfly and
7xx2 manual
A. General Information
1. Introduction
This manual helps you to optimize the usage of the DECT telephone in combination with the PBX.
Please use this manual at initial operation. Some features differ from the features described in the
manufacturer's documentation.
We wish you success and joy in working with your new DECT telephone and this manual!
Subject to alterations
Version 1 / 02.2016 (EN)
2. Used icons
Type
Icon
Notice
Hint
Action
Result of an
action
List
B. Initial operation
Requirements
Using this Spectralink IP telephone with your telephone system merely requires a sound broadband
connection.
The base is solely operated with Power over Ethernet (PoE). That means if your Ethernet connection
does not support PoE, you also need a PoE power supply for your base.
Description
Important information and notices that you
have to pay attention to.
Useful hints that provide additional
information.
–
is marked with a dash
⇒
is marked with an arrow
•
is marked with a bullet point
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 77 Series and is the answer not in the manual?

Questions and answers

Related Manuals for SpectraLink 77 Series

Summary of Contents for SpectraLink 77 Series

  • Page 1 B. Initial operation Requirements Using this Spectralink IP telephone with your telephone system merely requires a sound broadband connection. The base is solely operated with Power over Ethernet (PoE). That means if your Ethernet connection...

  • Page 2: Operation

    Adding an extension All telephones sent to you are preconfigured and connected to the telephone system. If you prefer to configure the devices yourself, please refer to the administration portal manual. Register handsets to the base: This is done via the menu on your handset. 1.

  • Page 3: Basic Functions

    1. Basic functions Inserting the battery Press down on the battery cover on the back of the device and slide downward. Unscrew the screw on the back of the handset. Remove the battery cover. Insert the rechargeable battery so that the markings on the battery are visible. Slide the battery cover back into the locking position (until you hear it click).
  • Page 4 Call list Press the left side of the navigation key, to access the call lists. Missed call Press the right side of the navigation key. Find name Press the top or bottom of the navigation key. Exit menu Press R. Saving a telephone number Dial the number and press Save.

  • Page 5: Placing Calls

    3. Placing calls Dialling with line open Press to place the call. - Dial the number. - Press to end the call. Dialling before picking up Dial the number. - Press to place the call. - To end the call press Speed dialling Press and hold one of the keys (0-9) for three seconds until the call is placed.
  • Page 6 Ignore call - Um einen Anruf abzuweisen, drücken Sie Ablehnen. Hold call - Nachdem Sie das Gespräch angenommen haben, drücken Sie R. Nun wird das Gespräch gehalten. Um den Anruf wieder fortzuführen, drücken Sie erneut R. Toggle calls - Drücken Sie R um in einem aktiven Gespräch einen neuen Anruf einzuleiten. Der erste Anruf wird automatisch auf Halten gesetzt.

  • Page 7: Edit Settings

    - Um das Mikrofon während eines Gesprächs stumm zu schalten, drücken Sie Mikr. aus (Mikrofon aus). Zum Beenden der Stummschaltung drücken Sie Mikr. an (Mikrofon ein). 5. Edit settings Adjust ring tone volume 1. Press Menu to open the main menu. 2.
  • Page 8 8. Voicemail Initial set-up When accessing the voicemail system’s voice menu for the first time, you should also set up your personal voicemail. 1. Dial *791 (* code) to access your voicemail. This takes you to the voicemail system’s voice menu. 2.

  • Page 9: Call Forwarding

    9. Call forwarding You can configure various call forwarding scenarios. For this purpose you can use the call forwarding profiles. Under the telephone menu you can only edit the default profle (catch all / always) to be found under the call forwarding profiles. You can edit the remaining call forwarding profiles via Ncontrol or via the administration portal.
  • Page 10 D. Upgrading Spectralink Repeater The Spectralink Repeater extends the coverage of your Spectralink solution. While the Repeater does not increase the number of data traffic channels, it does provide for a greater physical spread of the channels and therefore, extends the range covered by the bases.
  • Page 11 The home page of the service site contains various links to manuals, brief instructions, software portal.nfon.com downloads and templates. Please read these manuals thoroughly. They help you get the most out of your telephone system. The NFON AG support website contains detailed FAQs with valuable information pertaining to your support.nfon.net telephone system.

Table of Contents