Rear Suspension - GAS GAS TXTPRO - 2009 Manual

C The front suspension
is adjusted manually
Right (hydraulic extension).
Left (hydraulic compression).
The regulation is done
C
by turning one screw
(A) located in the axis
of the suspension tube cap.
The bleeder (B) is used to purge
air that may be trapped inside
the slider.
7
B
A
The preloading of the damper spring
C
is measured by the rotation of the
toothed rings (C) with the aid of a
special wrench.
The hidraulic brake
shock absorber
compression can be
adjusted by turning
t h e s c r e w ( D )
located in the lowest
area of the shock
absorber it should
be at the mid point
of his career.
- 31 -
C
D
7