Fuel Tank Dismantle; Radiator Fill-In - GAS GAS TXTPRO - 2009 Manual

I
Remove the fuel tank,
out out
located in the upper area
of the chassis, before
servicing the motor or
any other internal part of
the motorcycle. To do
this, first check that the
gasoline cap and fuel
cock are closed properly.
Next pull out the fuel tube
end (A) which is inserted
in the fuel cock. The third
step is to unscrew the
Allen screw M6 (B)
fastening the front upper
part of the tank . Once
the fuel tank is released,
lift it at the front section
and remove the tank
completely out the inside
of the chassis (C).
A)
I
coolant, or severe scalding may
result.
-24-
B)
When filling the radiator,
u s e c o o l i n g f l u i d
designed for lightweight
alloy motors.
The engine must be
cool before removing
the radiator cap or
when replacing radiator
C)
8