Rear Suspension - GAS GAS PAMPERA 450 - 2007 Manual

ADJUST SUSPENSION HEIGHT
The suspension height must be adjusted according to the height of
the suspension tube (1) to 10 mm, with this exiting the upper flange.
Suspension tube height: 10 mm

REAR SUSPENSION

The rear suspension is made up of a shock absorber, swing arm,
tie rods and rocker arm.
In general the operating characteristics of the single shock are similar
to the front fork however this is characterized as well as by the shock,
the articulated quadrangle composed of the rods and rocker arm.
To suit various riding conditions, the spring preload of the shock
absorber can be adjusted or the spring can be replaced with an
optional one. Also the dampening force can be adjusted easily so
changing oil viscosity is unnecessary.
(1)
(1). Height of
suspension
pipe.
- 35 -