Table of Contents
Advertisement
Quick Links
Installation Instructions
Surface Vertical Rod Exit Device Series
7110(F) and 7170 (F) (LBR)
WARNING
This product can expose you to
lead which is known to the state
of California to cause cancer and
birth defects or other reproductive
harm. For more information go to
www.P65warnings.ca.gov.
For technical support contact Yale
®
at 800.438.1951 x5033 or support@yalelocks.com
Copyright ©2018, 2020, 2021 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
80-9470-0010-000 05/21
Advertisement
Table of Contents
Related Manuals for Yale 7170 Series
Summarization of Contents
Installation
Mark Door
Locates and marks horizontal and vertical reference centerlines on the door.
Prepare Door, Frame, & Sill
Aligns templates, extends centerlines, and marks holes for device and strikes.
Size Device
Determines device length by measuring from the stop surface and marking for cutting.
Mount Device & Components
Mounts trim, fastens the device, sets the end clamp, and attaches mounting plates.
Rod Preparation & Assembly
Details sizing the top rod and assembling it with the top rod connector.
Bottom Bolt Assembly
Explains how to thread the bottom bolt into the bottom rod assembly for adjustment.
Complete Installation
Guides on installing the top rod/strike and lower rod/strike, testing, and installing covers.
Need help?
Do you have a question about the 7170 Series and is the answer not in the manual?
Questions and answers