Cleaning Procedures; Cleaning The Ocp Touchscreen; Vacuuming The Output Tray And Input Elevator - Kodak i1840 User Manual

Cleaning procedures

Cleaning the OCP
touchscreen
Vacuuming the output tray
and input elevator
5-4
Follow the cleaning procedure below to ensure the best scanner
performance and image quality.
The touchscreen requires very little maintenance. However,
periodically, it is recommended that you use a Staticide wipe to clean
the screen and dry it with a lint free cloth.
1. Power down the scanner.
2. Remove the output tray.
3. Thoroughly vacuum the output tray area and the input elevator area.
A-61555 May 2010