Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for IFM Electronic PN2094
Summarization of Contents
Preliminary note
Symbols used
Explains symbols used throughout the document for clarity.
Safety instructions
General safety guidelines
Outlines critical safety precautions for device integration and operation.
Functions and features
Applications
Describes the intended use and applications of the electronic pressure sensor.
Function
Operating modes
Details the different operating modes available for the device.
Communication, parameter setting, evaluation
Covers communication protocols, parameter adjustment, and data evaluation methods.
Switching function
Explains how the sensor's outputs switch based on pressure limits.
Analogue function
Describes the sensor's analogue output signal configuration and behavior.
IO-Link
Introduces the IO-Link communication interface for advanced device integration.
General information
Provides an overview of the IO-Link interface requirements and capabilities.
Functions only available via IO-Link communication
Lists specific features accessible exclusively through IO-Link.
Installation
Installation procedure
Step-by-step guide for physically installing the pressure sensor.
Electrical connection
Wiring instructions
Details the electrical connections and wiring examples for the device.
Operating and display elements
Device interface overview
Explains the function of LEDs, buttons, and the display on the device.
Menu
Menu structure: main menu
Outlines the hierarchical structure of the device's menu system.
Explanation of the menu
Provides detailed descriptions for menu items and their functions.
Explanation of menu level 1
Explains parameters and settings found in the first level of the menu.
Explanation of menu level 2
Details parameters and settings within the second level of the menu.
Parameter setting
Parameter setting in general
Describes the general procedure for setting device parameters.
Define operating mode (optional)
Guides the user on selecting and configuring the device's operating mode.
Configure display (optional)
Explains how to customize the display unit and update rate.
Set output signals
Details how to configure the device's output signals and their behavior.
Set output functions
Defines the specific functions for the switching outputs (hysteresis, window).
Define switching limits for the hysteresis function
Sets the upper and lower limits for hysteresis switching functions.
Define switching limits for the window function
Sets the upper and lower limits for window switching functions.
Scale analogue value
Configures the scaling for the analogue output signal.
User settings (optional)
Covers optional user-configurable settings for enhanced functionality.
Set delay time for the switching outputs
Configures the switch-on and switch-off delay times for outputs.
Set output logic for the switching outputs
Sets the output logic (PNP/NPN) for the switching outputs.
Set damping for the switching signal
Adjusts the damping constant for switching signals and process data.
Set damping for the analogue output
Configures the damping for the analogue output signal.
Zero-point calibration
Guides the user through the process of zero-point calibration.
Reset all parameters to factory setting
Restores the device to its default factory parameter settings.
Set colour change of the display
Configures the display color based on output status or measured value.
Graphical depiction of the colour change of the display
Visual examples illustrating how display colors change with parameters.
Diagnostic functions
Read min/max values for the system pressure
Allows reading and clearing of minimum and maximum recorded pressure values.
Read overload processes
Accesses information about overload events and their thresholds.
Operation
Read set parameters
Instructions on how to view the currently configured parameters.
Self-diagnostics / fault indications
Explains how the device performs self-diagnostics and displays fault/warning messages.
Technical data
Setting ranges
Provides detailed tables of setting ranges for various product models.
Setting ranges in operating mode 2
Lists specific setting ranges applicable to operating mode 2.
Setting ranges in operating mode 3
Lists specific setting ranges applicable to operating mode 3.
Factory setting
Default parameter values
Displays the default factory settings for all configurable parameters.
Need help?
Do you have a question about the PN2094 and is the answer not in the manual?
Questions and answers