Table of Contents
Advertisement
Original Instructions, Revision 1 June 2020
FAN JET PRO 65 & 130
Original Operating Manual
and parts list
Read carefully before installation and
operation
This document must not be copied duplicated or distributed without prior consent .
All and patent rights apply
STOCKS AG LIMITED, CROMWELL ROAD, WISBECH, CAMBRIDGESHIRE, UK.
Tel: 00 44 (0) 1945 464 909 Email: sales@stocks-ag.co.uk www.stocks-ag.co.uk
Advertisement
Table of Contents
Related Manuals for Stocks AG FAN JET PRO 130
Summarization of Contents
General Information and Initial Checks
Fan Jet Pro Technical Specifications
Detailed technical specifications for Fan Jet Pro models, including dimensions, weight, and performance.
Intended Use of the Fan Jet
Unintended Use and Risks
Defines uses considered non-intended and associated operator risks.
Machine Identification and Serial Number
Machine Warranty Information
Details the 12-month warranty terms, conditions, and exclusions for the machine.
Safety Guidelines and Precautions
Personal Protection Equipment (PPE)
Operator responsibility for wearing appropriate PPE for safe handling and material application.
General Safety Precautions
Covers safe lifting, disc operation, hopper access, electrical isolation, and operational restrictions.
Safety Warning Decals Explained
Warning Decal Interpretations
Interprets warning decals for operating instructions, hazards, and protective equipment.
Machine Maintenance Procedures
Routine Maintenance Checks
Covers pre-use checks, daily checks, after-use procedures, and cleaning advice.
Operational Procedures, Storage & Disposal
Clearing Blockages and Hopper Removal
Steps for clearing blockages and safely removing the hopper for maintenance.
Machine Storage and Disposal
Guidance on machine storage, disposal, and optional covers.
Mounting and Fitting Options
Fitting to Vehicle or Implement
Instructions for securely mounting the machine to a vehicle or implement.
Optional ATV and UTV Fitting Kits
Details optional kits for fitting the Fan Jet to ATVs and UTVs.
Mounting Plate Installation
Base Plate Mounting Instructions
Describes how to attach the tipping base plate to the machine and parent vehicle.
Electrical Components Identification
Key Electrical Component List
Lists and identifies key electrical components of the Fan Jet machine with part numbers.
Electrical System and Controls
Electrical Connections and Control Panels
Covers wiring, power supply, and the functions of fixed and variable speed control panels.
Remote Switch Facility Setup
Instructions for setting up a remote switch for shutter control and associated warnings.
Product Spreading Guide
Spreading Slug Pellets
Advice on testing, calibrating, and safely applying slug pellets.
Spreading Seeds and Granular Products
Guidance for spreading seeds, including calibration and optional accessories.
Setting Machine Parameters
Setting the Feed Rate
How to adjust the feed rate using the locking knob and regulator plate.
Setting the Spread Bias
How to rotate the feed mechanism to adjust the spreading arc for even pattern.
Adjustments and Calibration Aids
Setting Headland Deflectors
How to adjust deflectors to limit spread width for headland control.
Optional Calibration Chute
Details the calibration chute for safe product collection during testing.
Product Calibration Guide
Calibration Method and Application Formula
Explains how to calibrate for working width, application rate, and provides a calculation formula.
Troubleshooting Common Issues
Spinning Disc Not Rotating
Troubleshooting steps for when the spinning disc fails to rotate.
Feed Shutters Not Operating
Troubleshooting steps for when feed shutters do not operate correctly.
Need help?
Do you have a question about the FAN JET PRO 130 and is the answer not in the manual?
Questions and answers