Table of Contents
Advertisement
Installation and Operation
SDP8/SDP18 Preset
Metered Dispense Valve
Pulse FC Enabled
For dispensing oil, automatic transmission fluid (ATF), gear oils, and antifreeze.
Not approved for use in explosive atmospheres or hazardous locations. For professional
use only.
See page 6 for model information.
1500 psi (10 MPa, 103 bar) Maximum Working Pressure
Important Safety
Instructions
Read all warnings and instructions
in this manual and related system
manuals before using the
equipment. Save all instructions.
NOTICE
The metered dispense valve is designed to
dispense petroleum-based lubricants, and
antifreeze only. Brake cleaner and/or harsh
solvents may damage the plastic
components.
3A6673B
EN
Advertisement
Table of Contents
Related Manuals for Graco 26C360
Summarization of Contents
Warnings
SKIN INJECTION HAZARD
High-pressure fluid can pierce skin, causing serious injury requiring immediate medical attention.
EQUIPMENT MISUSE HAZARD
Misuse of equipment can lead to death or serious injury due to factors like fatigue, intoxication, or exceeding limits.
FIRE AND EXPLOSION HAZARD
Flammable fumes can ignite or explode. Ensure proper ventilation, eliminate ignition sources, and use grounded equipment.
PERSONAL PROTECTIVE EQUIPMENT
Wear appropriate PPE, including eye protection, hearing protection, respirators, clothing, and gloves, as recommended.
Overview
Metered Dispense Valve Description
Provides an overview of the metered dispense valve and its compatibility with Pulse FC systems.
Trigger Operation
Explains how to lock and unlock the trigger for dispensing operations.
Navigation Pad Usage
Details the function of the navigation arrows and ENTER button for device control.
Nozzle Operation
Describes the procedure for opening and closing the dispense nozzle.
Typical Installation
Mounting Bracket Installation
Information on using the mounting bracket kit for console installation.
Oil Bar Installation
Details on using the Oil Bar Kit for mounting multiple dispense valves.
Installation
Pressure Relief Procedure
Step-by-step guide to safely relieve pressure before servicing the equipment.
Grounding Requirements
Explains the importance of grounding for preventing static sparking and fire hazards.
Pre-Installation Steps
Procedures to follow before installing the metered dispense valve, including pressure checks and flushing.
Flushing Procedure
Instructions for flushing the equipment with a compatible solvent to prevent fluid contamination.
Installing the Dispense Valve
Step-by-step guide for attaching the metered dispense valve to the hose fitting.
Installing the Extension Tube
Instructions for threading and tightening the extension tube onto the valve.
Installing the Nozzle
Guidance on threading the nozzle onto the extension tube and proper tightening.
Preset Mode
Main Menu and Core Functions
Overview of the main menu screen and access to core functions like DISPENSE, TOTAL, and UTILITY MENU.
Calibration Procedures
Detailed steps for calibrating the metered dispense valve using manual or alternate methods.
Dispensing and Totalizing
Instructions for performing preset dispenses and understanding totalizer readings.
Utility Menu and Settings
Accessing utility functions like device information, reset, and various settings configurations.
Pulse FC Mode
Enable Pulse FC Mode
Steps to enable and activate the Pulse FC system using NFC tags or vouchers.
Pulse FC Activation and Calibration
Procedures for activating the meter and calibrating it within the Pulse FC environment.
Pulse FC Dispensing
How to dispense fluid using preset parameters configured via Pulse FC.
Pulse FC Utility Menu
Accessing utility functions like device information and display flip within Pulse FC mode.
Service
Battery Replacement
Step-by-step instructions for replacing the meter's AA alkaline batteries.
Parts and Related Kits
Parts Identification
Exploded view and list of individual parts for the metered dispense valve.
Related Kits and Accessories
Information on kits available for repairs, filters, and battery covers.
Troubleshooting
Battery and Display Issues
Solutions for problems related to the battery icon and inactive display.
Fluid Flow and Accuracy Problems
Solutions for issues with slow/no flow, accuracy, filter clogs, low pressure, and recalibration needs.
Leak and Dispensing Control Issues
Troubleshooting steps for leaks and the unit not stopping dispensing at the preset amount.
Error Codes and Freezing
Explains error codes and how to resolve screen lock-ups or freezing.
Error Codes
Error 2: Reed Switch Issues
Describes Error 2 related to reed switch malfunction or shipping damage.
Error 4: Flow Control Issues
Explains Error 4 concerning flow continuing after shut-off or lockout.
Technical Specifications
Metered Dispense Valve Specifications
Lists key technical details including flow range, pressure, dimensions, and fluid compatibility.
FCC / IC Compliance
Regulatory information regarding FCC and Industry Canada compliance.
Need help?
Do you have a question about the 26C360 and is the answer not in the manual?
Questions and answers