Table of Contents
Advertisement
Modules described in this manual
BXFMA-F
U-FH
U-IFFH
U-BI30-2, U-TR30-2,
etc.
INSTRUCTIONS
U-LH100-3
BXFMA
MOTORIZED ILLUMINATION SYSTEM
WITH MOTORIZED FOCUSING UNIT
This instruction manual is for the Olympus Motorized Illumination System with Motorized Focusing
Unit, Model BXFMA. To ensure the safety, obtain optimum performance and to familiarize yourself
fully with the use of this system, we recommend that you study this manual thoroughly before
operating the system. Retain this instruction manual in an easily accessible place near the work
desk for future reference.
A X 7 6 1 5
Advertisement
Table of Contents
Related Manuals for Olympus U-LH100-3
Summarization of Contents
IMPORTANT
Precautions When Unpacking the Microscope
Guidance on safely unpacking the microscope and releasing transport locks to prevent damage and ensure proper function.
Configuration of Instruction Manuals
Lists related instruction manuals for modules used with the BXFMA system.
SAFETY PRECAUTIONS
Safety Symbols
Explanation of safety symbols used on the motorized illumination system for safe operation.
Warnings and Cautions
Covers general warnings, getting ready, maintenance, storage, and cautions for system use.
2 NOMENCLATURE
Motorized Illuminator BXFMA-F Components
Detailed labeling and identification of the main BXFMA-F unit and its components.
Control Unit Identification
Identifies key control units: Hand Switch U-HSTR2, Focus Interface U-IFFH, and Power Supply TH4.
4 USING THE CONTROLS
4-1 Power Supply Unit TH4
Instructions for operating the TH4 Power Supply Unit, noting PC control for brightness.
4-2 Motorized Illuminator with Motorized Focusing Unit BXFMA-F
Covers setting light paths, centering diaphragms, and adjusting the focusing unit.
4-3 Observation Tube
Guidance on adjusting interpupillary distance, diopter, eye shades, and selecting light paths.
4-4 Differences in Operating Procedures of Software BX2-BSW
Details on variations in operating procedures when using BX2-BSW software.
8 ASSEMBLY
8-1 Assembly Diagram
Illustrates the sequence of assembly for the various microscope modules.
8-2 Preparations for Assembly
Details on installation methods for the illuminator on the user's system.
8-3 Detailed Assembly Procedure
Step-by-step guide for attaching components like the halogen bulb and revolving nosepiece.
Need help?
Do you have a question about the U-LH100-3 and is the answer not in the manual?
Questions and answers